Kenmore 790.75503 manual General, To Remove and Replace Right Oven Door

To Remove and Replace		Right Oven		Door		General
1.	Open the door to the fully	opened position.				Cleaning
2.	Pull up the lock located on both hinge supports and engage it in the hinge levers. You may
						FEATURE OVERVIEW
	have to apply a little downward		pressure on the door to pull the locks fully over the hooks.
3.	Grabthedoorbythesides,	pull	the bottom	of the door up and toward you to disengage		• To Remove and Replace
	the hinge supports. Keep pulling the bottom			of the door toward you while rotating	the top	Oven Door
	of the door toward the range to completely			disengage the hinge levers.		To Remove and Replace
4.	To replace the door, reversethe door removal steps. Make sure the hinge supports				are fully	Storage Drawer
	engaged before unlocking the hinge levers.

The door is heavy. After removing door, lay it flat on the floor with its inside

facing down.

e lever

Z

			Hinge	Slot
in		Lock engaged	Door	removed
normal	position	for door removal	from	range

To Remove and Replace Storage Drawer

Pull up with finger

To Remove Storage Drawer:

I.Open the drawer to the fully opened position.

2.Locate the glide lever on each side of drawer; pull up on the left glide lever and push down on the right glide lever (see figure 1).

3.Pull the drawer away from the range.

Left Glide

To Replace Storage Drawer:

1.Pull the bearing glides to the front of the range (see figure 2).

2.Align the drawer glides with the slots on the bearing glides.

3.Push the drawer into the range until the glides levers "click" (approx. 2 in.). Pull the drawer open again to seat it into position.

4.If you do not hear the glide levers "click" or if the drawer does not feel seated, remove it and repeat steps 1 through 3. Doing so will minimize damage to the bearing glides. Do not try to force the drawer into place.

Push down 'withfinger

Fig. I

Fig. 2

35