Oven Cleaning

FEATURE OVERVIEW

Self-Cleaning Cycle

To start the Self-Clean Cycle

*We recommend a 2 hour self-clean cycle for light soils, a 3 hour cycle for average soils, and a 4 hour cycle for heavy

soils.

DO NOT force the oven door open. This can damage the automatic door locking system. Use caution when opening the door after the self-cleaning cycle is completed. The oven may still be VERY HOT.

INSTRUCTIONS

DISPLAY

To Set the Controls for the Self-Cleaning Cycle To Start

Immediately and Shut Off Automatically:

1.Be sure the clock shows the correct time of day and the door is close.

2.Push CLEAN. "CLN", "TIME" will appear in the display.

3.Push and hold the UP or DOWN ARROW until "3:00" appears in the display. Set the cleaning time based on the amount of soil you have: light, medium or heavy. *See note above.

4.As soon as the controls are set, the motor driven lock begins to close automatically. After about 15 seconds, the word "DOOR" is displayed and 3 beeps are heard. From this moment, the lock is closed and the word "LOCKED" appears in the display.

5.The word "ON" will be displayed; the main display will shown cleaning time and count down until it reaches ":00".

When the Self-Clean Cycle is Completed

1.The time of day will appear in the display window and the word "LOCKED" will remain in the display until the oven cavity has cooled down.

2.Once the oven has cooled down and the word "LOCKED" shown in the display has gone out, the oven door can be opened.

To Stop or Interrupt a Self-Cleaning Cycle

If it becomes necessaryto stop or interrupt a self-cleaning cycle due to excessive smoke or fire:

1.Push CLEAR OFF.

2.Once the oven has cooled down and the word "LOCKED" shown in the display has gone out, then the oven door can be opened.

28

Page 28
Image 28
Kenmore 790.75503 manual Immediately and Shut Off Automatically, When the Self-Clean Cycle is Completed, Feature Overview