Oven Control Functions
Note: The time of day must first be set in order to operate the oven.
To Set the Clock
When the range is first plugged in, or when the power supply to the range has been interrupted, the display will flash "12:00".
1.Press 
.
2.Within 5 seconds, press and hold the 
or 
until the correct time of day appears in the display.
To Set the Minute Timer:
1.Press 
.
2.Press the 
to increase the time in one minute increments. Press and hold the 
to increase the time in 10 minute increments. The timer can be set for any amount of time from 1 minute to 11 hours and 59 minutes.
Note: If you press the 
first, the timer will advance to 11 hours and 59 minutes.
3.The display shows the timer count down in minutes until one minute remains. Then the display will count down in seconds.
4.When the set time has run out, the timer will sound a 3 second beep. 0:00 will appear in the display until 
is pressed.
Note: While the minute timer is counting down, the “:” will flash. The minute timer does not start or stop cooking. It serves as an extra timer in the kitchen that will beep when the set time has run out. The minute timer can be used alone or during any of the other oven functions. When the minute timer is in use with any other function, the minute timer will be shown in the display. To view other functions, press the pad for that function.
To Change the Minute Timer while it is in use:
While the timer is active and shows in the display, press and hold the 
or 
to increase or decrease the time.
To Cancel the Minute Timer before the set time has run out: Press 
.
Changing the Temperature Display Mode (some models)
The electronic oven control temperature display mode was factory preset to display (Fahrenheit) °F oven tempertaures. Note: Oven cooking temperatures may be set from 170°F to 550°F (77°C to 287°C).
To change the Temperature Display Mode to °C (Celsius) or from °C to °F (do not use Bake or Broil while changing the Temperature Display Mode):
1.Press & hold the 
key pad for
2.Press the 
key pad once to choose the (Fahrenheit) °F mode; or press the 
key pad once to choose the (Celsius) °C mode.
3.After 5 seconds, the display will flash. To accept the change, wait 5 more seconds until the oven control beeps once. To complete the change skip step 4 below, OR;
4.If at any time during the process of changing the Temperature Display Mode (F or C ) you decide the change is not
desired, press the 
key pad before the oven control beeps once to cancel the process.
5.The control will beep once. The display will then return to the time of day with any temperature display mode change you may have requested.
7
