Bake-n-Warm™ Double Oven Light Operation (some models):
The
pad.
To Remove the Bake-n-Warm™ Double Oven Drawer & Replace the Oven Light:
1.Before drawer removal, be sure to turn OFF the
2.Pull the drawer away from the oven. Using a
3.With one hand hold the drawer front in place. Use your other hand to pull the glide away from the oven (See Fig. 2) until the glide hook disengages (See Fig. 3).
4.Repeat from step 3 above for the other side of the drawer.
5. | With BOTH glide hooks disengaged, | Fig. 1 |
| carefully lift the drawer up and away |
|
| from the oven. Push both drawer |
|
| glides into lower oven cavity. |
|
6. | Replace the lower oven light with a |
|
| 40 Watt Appliance light bulb (Refer |
|
| to Fig.5). |
|
Be sure the range is unplugged and all parts are COOL before replacing oven light. Wear a leather- faced glove for protection against possible broken glass. Use CAUTION when reaching across the oven element and brackets. These parts may be sharp and cause cuts.
Fig. 2
Glide Hook Disengaged | Glide Hook Engaged |
Fig. 3 | Fig. 4 |
Fig. 5
To replace Bake-n-Warm™ Double Oven Drawer:
1.Pull both drawer glides and fully extend outward from lower oven cavity.
2.Carefully rest the drawer on top of both glides.
3.Adjust the drawer position on top of the rails until both of the drawer side slots are correctly engaged with the glide hooks (See Fig. 4).
4.Pull the drawer forward to line up the drawer with both screw holes in the glides. Using a
5.Replace drawer rack if removed.
6.Close lower oven drawer.
24