SETTING SURFACE CONTROLS

Dual radiant surface elements (some models) Symbols on the backguard are used to indicate which coil of the dual radiant element will heat. The symbol indicates the inner coil only. The symbol indicates both inner and outer coils will heat.

To operate a dual radiant element:

1.Place correctly sized cookware on dual radiant surface element.

2.Push in and turn the surface control knob clockwise to begin heating both the inner and outer portions of the dual element. If only the inner heating portion is needed like for smaller cookware, push in and turn the knob counter-clockwise to start.

3.When cooking is complete, turn the dual radiant surface element OFF before removing the cookware.

Start most cooking operations on a higher setting and then turn to a lower setting to finish cooking. The surface control knobs do not have to be set exactly on a particular mark.

Use the marks as a guide and adjust the control knob as needed. A glowing red surface heating area extending beyond the bottom edge of the cookware indicates the cookware is too small for the surface heating area.

You may switch from either coil setting at any time during cooking. See Suggested radiant surface element settings table on previous page.

Quick boil feature (some models)

Your appliance may be equipped with one or two elements on the ceramic cooktop marked quick boil.

These radiant elements are best used when bringing larger quantities of liquid to temperature and when preparing larger quantities of food.

CAUTION

Radiant surface elements may appear to have cooled after they have been turned off. The glass surface may still be hot and burns may occur if the glass surface is touched before it has cooled sufficiently.

Do not place flammable items such as plastic salt and pepper shakers, spoon holders or plastic wrappings on top of the range when it is in use. These items could melt or ignite. Potholders, towels or wooden spoons could catch fire if placed too close to the surface elements.

Heating with inner (small)

Heating with both

element only

elements

Areas that heat are shown darkened.

Fig. 1

Fig. 2

IMPORTANT

Do not allow aluminum foil, or ANY material that can melttomakecontactwiththeceramicglasscooktop. If these items melt on the cooktop they will damage the ceramic cooktop.

NOTES

The size and type of utensil used, and the amount and type of food being cooked will influence the setting needed for best cooking results.

The Element ON indicator lights will glow when one or more elements are turned ON. A quick glance at these indicator lights when cooking is finished is an easy check to be sure all control knobs are turned OFF. The Hot Surface indicator light will continue to glow AFTER the control knob is turned to the “OFF” position and will glow until the heating surface area has cooled sufficiently.

12

Page 11 Page 13
Page 12
Image 12
Frigidaire 316902304 important safety instructions To operate a dual radiant element, Quick boil feature some models
Page 11 Page 13

316902304 specifications

The Frigidaire 316902304 is a high-quality oven burner assembly that serves as a crucial component in the operation of various Frigidaire cooktops and ranges. Designed with efficiency and reliability in mind, this burner assembly ensures an even and consistent heating experience, making it easier to prepare meals to perfection.

One of the main features of the Frigidaire 316902304 is its construction from durable materials designed to withstand the rigors of daily cooking. This high-grade metal not only contributes to the longevity of the product but also supports optimal heat distribution across the cooking surface, allowing for even cooking results. The design facilitates easy installation, enabling users to replace worn-out or damaged burners effortlessly, ensuring minimal downtime in the kitchen.

Incorporating advanced technologies, the Frigidaire 316902304 utilizes modern engineering techniques that enhance cooking performance. It boasts efficient energy consumption, reducing overall cooking times and energy bills. This oven burner assembly features compatibility with various types of fuel, including natural gas and propane, which gives consumers the flexibility to choose the best option for their cooking needs.

Another significant advantage of this burner assembly is its compatibility with a wide range of Frigidaire models. This versatility makes it an ideal choice for homeowners, professional chefs, or anyone needing a reliable burner to enhance their cooking experience. The burner is designed to fit seamlessly into a range of Frigidaire appliances, making it easy to upgrade or replace.

In terms of safety features, the Frigidaire 316902304 has built-in mechanisms to prevent flame blowout, ensuring a safe cooking environment. This aspect is particularly important for families with children and pets, as it minimizes the risk of accidents in the kitchen.

The Frigidaire 316902304 is also designed for easy cleaning, with a smooth surface that allows for quick wipe-downs and maintenance. With its robust design, energy efficiency, compatibility, and safety features, the Frigidaire 316902304 is an essential component for anyone looking to enhance their cooking experience while ensuring durability and performance in their kitchen.
Top Page Image Contents