Cooktop cleaning (cont’d)

Plastic or foods with a high sugar content:

These types of soils need be removed immediately if spilled or melted onto the ceramic cooktop surface. Permanent damage (such as pitting of the cooktop surface) may occur if not removed immediately.

After turning the surface elements OFF, use a razor blade scraper or a metal spatula with a mitt and scrape the soil from the hot surface (as illustrated). Allow the cooktop to cool, and use the same method for heavy or burned on soils.

WARNING

DO NOT use a cooktop cleaner on a hot cooktop. The fumes can be hazardous to your health and can chemically damage the ceramic glass surface.

Do not use the following on the cooktop:

•Do not use abrasive cleaners and scouring pads, such as metal and some nylon pads. They may scratch the cooktop, making it more difficult to clean.

•Do not use harsh cleaners, such as chlorine bleach, ammonia or oven cleaners, as they may etch or discolor the cooktop.

•Do not use dirty sponges, cloths or paper towels, as they can leave soil or lint on the cooktop which can burn and cause discoloration.

CARE & CLEANING

IMPORTANT

Damage to the ceramic glass cooktop may occur if you use an abrasive type cleaning pad. Only use cleaning products that have been specifically designed for ceramic glass cooktops.

Caution for aluminum use on the cooktop

•Aluminum Foil - Use of aluminum foil on a hot cooktop will damage the ceramic cooktop. Do not use thin aluminum cooking utensils or allow aluminum foil to touch the ceramic cooktop under ANY circumstances.

•Aluminum utensils - The melting point of aluminum is much lower than that of other metals. Care must be taken when aluminum pots or pans are used on the cooktop. If aluminum pans are allowed to boil dry when using the cooktop, not only will the utensil be damaged or destroyed, but it may fuse to, break or mark the ceramic glass surface, permanently damaging the cooktop surface.

Replacing the oven light

The light bulb is located at the rear of the oven and is covered with a glass shield held by a wire holder. The glass shield must be in place whenever the oven is in use.

To replace the oven light bulb:

1.Turn electrical power off at the main source or unplug the range.

2.Press wire holder to one side to release the glass shield.

3.Replace bulb with a new 40 watt appliance bulb.

4.Replace glass shield over bulb and snap wire holder into place.

5.Turn power back on again at the main source (or plug the range back in).

6.The clock will then need to be reset. To reset, see “Setting the clock” in this Use & Care Guide.

CAUTION

Be sure the range is unplugged and all parts are COOL before replacing oven light. Wear a leather-faced glove for protection against possible broken glass.

31

Page 30 Page 32
Page 31
Image 31
Frigidaire 316902304 Cooktop cleaning cont’d, Replacing the oven light, To replace the oven light bulb
Page 30 Page 32

316902304 specifications

The Frigidaire 316902304 is a high-quality oven burner assembly that serves as a crucial component in the operation of various Frigidaire cooktops and ranges. Designed with efficiency and reliability in mind, this burner assembly ensures an even and consistent heating experience, making it easier to prepare meals to perfection.

One of the main features of the Frigidaire 316902304 is its construction from durable materials designed to withstand the rigors of daily cooking. This high-grade metal not only contributes to the longevity of the product but also supports optimal heat distribution across the cooking surface, allowing for even cooking results. The design facilitates easy installation, enabling users to replace worn-out or damaged burners effortlessly, ensuring minimal downtime in the kitchen.

Incorporating advanced technologies, the Frigidaire 316902304 utilizes modern engineering techniques that enhance cooking performance. It boasts efficient energy consumption, reducing overall cooking times and energy bills. This oven burner assembly features compatibility with various types of fuel, including natural gas and propane, which gives consumers the flexibility to choose the best option for their cooking needs.

Another significant advantage of this burner assembly is its compatibility with a wide range of Frigidaire models. This versatility makes it an ideal choice for homeowners, professional chefs, or anyone needing a reliable burner to enhance their cooking experience. The burner is designed to fit seamlessly into a range of Frigidaire appliances, making it easy to upgrade or replace.

In terms of safety features, the Frigidaire 316902304 has built-in mechanisms to prevent flame blowout, ensuring a safe cooking environment. This aspect is particularly important for families with children and pets, as it minimizes the risk of accidents in the kitchen.

The Frigidaire 316902304 is also designed for easy cleaning, with a smooth surface that allows for quick wipe-downs and maintenance. With its robust design, energy efficiency, compatibility, and safety features, the Frigidaire 316902304 is an essential component for anyone looking to enhance their cooking experience while ensuring durability and performance in their kitchen.
Top Page Image Contents