BEFORE YOU CALL • Solutions to common problems

Problem

Solution

 

 

Soil not completely removed after self- cleaning cycle.

•Failure to clean bottom, front top of oven, frame of oven or door area outside oven seal. These areas are not in the self-cleaning area, but get hot enough to burn on residue. Clean these areas before the self-cleaning cycle is started. Burned-on residue can be cleaned with a stiff nylon brush and water or a nylon scrubber. Be careful not to damage the oven gasket.

Oven smokes excessively during broiling.

• Incorrect setting. Follow broiling instructions in Setting Oven Controls.

 

• Make sure oven door is opened to broil stop position.

 

• Meat too close to the broil element. Reposition the broil rack to provide

 

proper clearance between the meat & the element. Preheat the broil

 

element for searing.

 

• Meat not properly prepared. Remove excess fat from meat. Cut remaining

 

fatty edges to prevent curling, but do not cut into lean.

 

• Broiler pan and insert wrong side up and grease not draining. Always

 

place grid on the broiler pan with ribs up & slots down to allow grease to

 

drip into pan (some models).

 

• Grease has built up on oven surfaces. Regular cleaning is necessary when

 

broiling frequently. Old grease or food spatters cause excessive smoking.

 

 

Flames inside oven or smoking from

• Excessive spillovers in oven. For example this will happen for pie

oven vent.

spillovers or large amounts of grease left on the oven bottom. Wipe up

 

excessive spillovers before starting oven. If flames or excessive smoke

 

are present see “About broiling” in the Setting Oven Controls section.

Oven control panel beeps & displays any F code error (for example F10)

•Oven control has detected a fault or error condition. Press CANCEL to clear the display & stop beeping. Try the bake or broil feature again. If the F code error repeats, remove power from appliance, wait 5 minutes and then repower appliance and set clock for the time of day. Try the bake or broil feature again. If the fault recurs, record fault and call for service.

Scratches or abrasions on cooktop

•

Coarse particles such as salt or sand between cooktop and utensils can

surface.

 

cause scratches. Be sure cooktop surface and bottoms of utensils are

 

 

clean before usage. Small scratches do not affect cooking and will

 

 

become less visible with time.

 

• Cleaning materials not recommended for ceramic-glass cooktop have been

 

 

used. See "Cooktop Cleaning and Maintenance in the Care and

 

 

Cleaning section of this Use & Care Guide.

 

•

Cookware with rough bottom has been used. Use smooth, flat-bottomed

 

 

cookware.

 

 

 

Metal marks on the cooktop.

•

Sliding or scraping of metal utensils on cooktop surface. Do not slide metal

 

 

utensils on cooktop surface. Use a ceramic-glass cooktop cleaning creme to

 

 

remove the marks. See "Cooktop Cleaning and Maintenance" in the Care and

 

 

Cleaningsection.

 

 

 

Brown streaks or specks on cooktop

•

Boilovers are cooked onto surface. Use razor blade scraper to remove soil.

surface.

 

See "Cooktop Cleaning and Maintenance" in the Care & Cleaning section.

 

 

 

Areas of discoloration with metallic sheen

•

Mineral deposits from water and food. Remove using a ceramic-glass cooktop

on cooktop surface.

 

cleaning creme. Use cookware with clean, dry bottoms.

34

Page 33 Page 35
Page 34
Image 34
Frigidaire 316902304 important safety instructions Used. See Cooktop Cleaning and Maintenance in the Care, Cleaningsection
Page 33 Page 35

316902304 specifications

The Frigidaire 316902304 is a high-quality oven burner assembly that serves as a crucial component in the operation of various Frigidaire cooktops and ranges. Designed with efficiency and reliability in mind, this burner assembly ensures an even and consistent heating experience, making it easier to prepare meals to perfection.

One of the main features of the Frigidaire 316902304 is its construction from durable materials designed to withstand the rigors of daily cooking. This high-grade metal not only contributes to the longevity of the product but also supports optimal heat distribution across the cooking surface, allowing for even cooking results. The design facilitates easy installation, enabling users to replace worn-out or damaged burners effortlessly, ensuring minimal downtime in the kitchen.

Incorporating advanced technologies, the Frigidaire 316902304 utilizes modern engineering techniques that enhance cooking performance. It boasts efficient energy consumption, reducing overall cooking times and energy bills. This oven burner assembly features compatibility with various types of fuel, including natural gas and propane, which gives consumers the flexibility to choose the best option for their cooking needs.

Another significant advantage of this burner assembly is its compatibility with a wide range of Frigidaire models. This versatility makes it an ideal choice for homeowners, professional chefs, or anyone needing a reliable burner to enhance their cooking experience. The burner is designed to fit seamlessly into a range of Frigidaire appliances, making it easy to upgrade or replace.

In terms of safety features, the Frigidaire 316902304 has built-in mechanisms to prevent flame blowout, ensuring a safe cooking environment. This aspect is particularly important for families with children and pets, as it minimizes the risk of accidents in the kitchen.

The Frigidaire 316902304 is also designed for easy cleaning, with a smooth surface that allows for quick wipe-downs and maintenance. With its robust design, energy efficiency, compatibility, and safety features, the Frigidaire 316902304 is an essential component for anyone looking to enhance their cooking experience while ensuring durability and performance in their kitchen.
Top Page Image Contents