![Setting the Clock](/images/new-backgrounds/80093/800933x1.webp)
Setting the Clock
The Clock pad is used to set the clock. The clock may be set for 12 or 24 hour time of
day operation. The clock has been preset at the factory for the 12 hour operation. When the wall oven is first plugged in, or when the power supply to the appliance has been interrupted, the timer in the display will flash along with "PF" (power failure, See Fig. 1).
When PF appears in the display and 12:00 is flashing, press Clear/Off . A beep will sound and PF will disappear.
INSTRUCTIONSPRESS
To set the clock (example below for 1:30)
UPPER | WARM | CONV | UPPER | LOWER |
| CONV | WARM | LOWER |
ROAST | BAKE | BROIL | TIMER | DOOR | CLEAN | BROIL | BAKE | ROAST |
LOCKED | DELAY | TIMED | REMOVE | RACKS |
| TIMED | DELAY | LOCKED |
Fig. 1
DISPLAY
1.Press Clock . "CLO" and the current time of day will appear in the display (Fig. 2).
2. Press 1 3 0 pads to set the time of day to 1:30
(Fig. 3). Press START . The time of day will appear in the display (Fig. 4).
Clock
1 3 0
START
UPPER | WARM | CONV |
| UPPER | LOWER |
|
| CONV | WARM |
| LOWER | |||||||||
ROAST | BAKE | BROIL |
| TIMER | DOOR | CLEAN |
| BROIL | BAKE |
| ROAST | |||||||||
LOCKED | DELAY | TIMED |
| REMOVE | RACKS |
|
| TIMED | DELAY | LOCKED | ||||||||||
|
|
|
|
|
|
|
|
| Fig. 2 |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
UPPER | WARM | CONV |
| UPPER | LOWER |
|
| CONV | WARM |
| LOWER | |||||||||
ROAST | BAKE | BROIL |
| TIMER | DOOR | CLEAN |
| BROIL | BAKE |
| ROAST | |||||||||
LOCKED | DELAY | TIMED |
| REMOVE | RACKS |
|
| TIMED | DELAY | LOCKED | ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| Fig. 3 |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Changing between 12 or 24 hour time of day display
1.Press and hold Clock for 6 seconds. "CLO" and the
current time of day will appear in the display (Fig. 3). A beep will sound and "12h" (Fig. 5) or "24h" (Fig. 6) will appear in the display.
2.Press Clean to switch between the 12 and 24 hour time
of day display. The display will show either "12h" (Fig. 5) or "24h" (Fig. 6).
3.Press START to accept the change or press Clear/Off to reject the change.
4.Reset the correct time as described in To set the Clock above. Please note that if the 24 hour time of day mode was chosen, the clock will now display time from 0:00 through 23:59 hours.
Clock for 6 seconds
Clean
START or Clear /Off
UPPER | WARM | CONV | UPPER | LOWER |
| CONV | WARM | LOWER |
ROAST | BAKE | BROIL | TIMER | DOOR | CLEAN | BROIL | BAKE | ROAST |
LOCKED | DELAY | TIMED | REMOVE | RACKS |
| TIMED | DELAY | LOCKED |
|
|
| Fig. 4 |
|
|
|
| |
UPPER | WARM | CONV | UPPER | LOWER |
| CONV | WARM | LOWER |
ROAST | BAKE | BROIL | TIMER | DOOR | CLEAN | BROIL | BAKE | ROAST |
LOCKED | DELAY | TIMED | REMOVE | RACKS |
| TIMED | DELAY | LOCKED |
Fig. 5
UPPER WARM
Fig. 6
2