Frigidaire 318200138 (0610) manual Adjusting Oven Temperature

Adjusting Oven Temperature

The temperature in the oven has been preset at the factory. When first using the oven, be sure to follow recipe times and temperatures. If you think the oven is too hot or too cool, the temperature in the oven can be adjusted. Before adjusting, test a recipe by using a temperature setting that is higher or lower than the recommended temperature.

The baking results should help you to decide how much of an adjustment is needed.

Note: The oven temperature adjustments made with this feature will not change the Self-Clean cycle temperature or the Broil temperature .

INSTRUCTIONS

To adjust the oven temperature:

1.Press and hold Bake for 6 seconds. The preset

adjustment number will appear and "UPPER" will flash in the display (Fig. 1).

2.To increase the temperature use the number pads to

enter the desired change. (Example 30°F) 3 0

(Fig. 2). The temperature may be increased as much as 35°F (19°C). To decrease the temperature use the number pads to enter the desired change. (Example -

30°F) 3 0 and then press Clean (Fig. 3). The

temperature may be decreased as much as 35°F (19°C).

3. Press START to accept the temperature change and the

display will return to the time of day. Press Clear/Off to reject the change if necessary.

NOTE: Each oven may be adjusted individually.

PRESS

Bake

3 0

3 0 Clean

START or

Clear

/Off

DISPLAY

UPPER	WARM	CONV	UPPER	LOWER		CONV	WARM	LOWER
ROAST	BAKE	BROIL	TIMER	DOOR	CLEAN	BROIL	BAKE	ROAST
LOCKED	DELAY	TIMED	REMOVE	RACKS		TIMED	DELAY	LOCKED

Fig. 1

UPPER	WARM	CONV	UPPER	LOWER		CONV	WARM	LOWER
ROAST	BAKE	BROIL	TIMER	DOOR	CLEAN	BROIL	BAKE	ROAST
LOCKED	DELAY	TIMED	REMOVE	RACKS		TIMED	DELAY	LOCKED

Fig. 2

UPPER	WARM	CONV	UPPER	LOWER	CONV	WARM	LOWER
ROAST	BAKE	BROIL	TIMER	DOOR CLEAN	BROIL	BAKE	ROAST
LOCKED	DELAY	TIMED	REMOVE	RACKS	TIMED	DELAY	LOCKED

Fig. 3

To Set the Oven Control Back To The Factory Default Settings

This function allows you to reset the user defined settings back to the original settings. These include 12 or 24 Hour Time of Day Display, Continuous Control Operation or 12 Hour Energy Saving mode, Silent Control Operation or Normal Sounds, Fahrenheit or Celsius Temperature Display, Oven Temperature Adjustment (set back to 0).

1.	Press and hold 7 until the first single beep sounds (about 6 seconds)
2.	After the first beep, press START pad once. All the setting are now set to the original factory default.

18