Frigidaire 318204125 Oven Cleaning, Self-Clean Cycle Time Length, Press, Instructions, Display

Oven Cleaning

Self-Clean Cycle Time Length

The SPEED CLEAN Speedclean , CLEAN Clean and MAXX CLEAN cleanMaxx pads control the Self-Cleaning feature. If you are

planning to use the oven directly after a self-clean cycle remember to allow time for the oven to cool down and the oven door to unlock. This normally takes about one hour. So a 3 hour self-clean cycle will actually take about 4 hours to

complete. *It is recommend to use a Speedclean cycle (2 hour) for light soils, a Clean cycle (3 hour) for average soils, and a

cleanMaxx cycle (4 hour) for heavy soils (to assure satisfactory results).

During the Self-Cleaning cycle, the outside of the range can become very hot to touch. DO NOT leave small children unattended near the appliance.

To avoid possible burns use care when opening the oven door after the Self-Cleaning cycle. Stand to the

side of the oven when opening the door to allow hot air or steam to escape.

DO NOT force the oven door open. This can damage the automatic door locking system. Use caution and

avoid possible burns when opening the door after the Self-Cleaning cycle has completed. The oven may still be VERY HOT.

INSTRUCTIONS PRESS DISPLAY

To start an immediate Self-Cleaning cycle or to set a delay start time of 4:30 o'clock and shut of automatically (example provided is a default 3 hour Self-Clean cycle):

1.	Be sure the clock is set with the correct time of day, the oven is empty
	and the oven door is closed.				TIMED DELAY TIMER	CONV BAKE BROIL
					DOOR LOCKED CLEAN	ROAST WARM PROBE
2.	Press	Clean	. "CLEAN" will flash and "3:00" HR will show in the display	Clean	Figure 1

(Figure 1). The control will automatically clean for a 3 hour period (default self-cleaning cycle time). Note: If a 2 or 4 hour clean time is desired,

press Speedclean for 2 hour or press cleanMaxx for a 4 hour clean time. Set the	Speedclean or cleanMaxx
cleaning time based on the amount of soil: light, medium or heavy (* See
above).
3. Press START .The "DOOR LOCKED" icon will flash; "CLEAN" icon	START
and the letters "CLn" will remain on in the display (Figure 2).

4.As soon as the control is set, the motor driven oven door lock will begin to close automatically. Once the door has been locked the "DOOR LOCKED" indicator light will stop flashing and remain on. Also, the oven icon will appear in the display (Figure 3).

TIMED DELAY	TIMER	CONV	BAKE	BROIL
DOOR LOCKED CLEAN		ROAST WARM PROBE
	Figure 2
TIMED DELAY	TIMER	CONV	BAKE	BROIL
DOOR LOCKED CLEAN		ROAST WARM PROBE

Figure 3

Note: Allow about 15 seconds for the oven door lock to close.

NOTE: If the optional delay Self-Clean feature is needed, finish steps 5-7. If Self-Clean is started immediately

skip the remaining steps and continue with "When the Self-Clean cycle is done" on the following page.

5. Press	Start	. Enter the desired start time using the number pads	4
	time

30 (Figure 4).

6.Press START . "CLn", "DELAY", "DOOR LOCKED" and "CLEAN" icons will remain on (Figure 5).

7.The control will start the self-cleaning at the set start time, for the period of time previously selected. At that time, the icon "DELAY" will go out; "CLn" and oven icon will appear in the display (Figure 6).

Start time

4 3 0

START

TIMED DELAY	TIMER	CONV	BAKE	BROIL
DOOR LOCKED CLEAN		ROAST WARM PROBE
	Figure 4
TIMED DELAY	TIMER	CONV	BAKE	BROIL
DOOR LOCKED CLEAN		ROAST WARM PROBE
	Figure 5
TIMED DELAY	TIMER	CONV	BAKE	BROIL
DOOR LOCKED CLEAN		ROAST WARM PROBE

Figure 6

17