Setting the Clock
The Clock pad is used to set the clock. The clock may be set for 12 or 24 hour time of day
operation. The clock has been preset at the factory for the 12 hour operation. When the range is first plugged in, or when the power supply to the range has been interrupted, the time in the display will flash (See Figure 1).
TIMED DELAY TIMER | CONV BAKE BROIL |
DOOR LOCKED CLEAN | ROAST WARM PROBE |
Figure 1
INSTRUCTIONS
To set the clock (example below for 1:30)
1. Press Clock . "CLO" will appear in the display (Figure 2).
2. Press 1 3 0 pads to set the time of day to 1:30 (Figure 3).
"CLO" will stay in the display. Press START . "CLO" will disappear
and the clock will start (Figure 4).
PRESS
Clock
1 3 0
START
DISPLAY
TIMED DELAY | TIMER | CONV | BAKE | BROIL |
DOOR LOCKED CLEAN | ROAST WARM PROBE | |||
| Figure 2 |
|
| |
TIMED DELAY | TIMER | CONV | BAKE | BROIL |
Changing between 12 or 24 hour time of day display
1.Press and hold Clock for 7 seconds (Figure 3). After 7 seconds,
"12h" (Figure 5) or "24h" (Figure 6) will appear in the display and the control will beep once.
2.Press Clean to switch between the 12 and 24 hour time of day
display. The display will show either "12h" (Figure 5) or "24h" (Figure 6).
3.Press START to accept the change or press Clear/Off to reject the change.
4.Reset the correct time as described in To set the Clock above. Please note that if the 24 hour time of day mode was chosen, the clock will now display time from 0:00 through 23:59 hours.
Clock for 7 seconds
Clean
START or Clear
/Off
DOOR LOCKED CLEAN | ROAST WARM PROBE |
| |
Figure 3 | |
|
|
TIMED DELAY TIMER | CONV BAKE BROIL |
DOOR LOCKED CLEAN | ROAST WARM PROBE |
|
|
Figure 4
Figure 5
Figure 6
2
