BEFORE SETTING OVEN CONTROLS
SETTING THE CLOCK
The SET CLOCK pad is used to set the clock. The clock may be set for 12 or 24 hour time of day operation. The clock has been preset at the factory for the 12 hour operation. When the range is first plugged in, or when the power supply to the range has been interrupted, the timer in the display will flash.
To set the clock (example below for 1:30)
1.Press SET CLOCK. "CLO" will appear in the display.
2.Press 
or 
pad to set the correct time of day. Wait 4 seconds to accept the change or press the CANCEL pad to reject the change. The new time of day will appear in the display.
CHANGING BETWEEN 12 OR 24 HOUR TIME OF DAY DISPLAY
1.Press and hold SET CLOCK for 6 seconds. "CLO" will appear in the display.
2.CONTINUE holding the pad until "12h" or "24h" appears in the display and the control beeps once.
3.Press 
or 
pad to switch between the 12 and 24 hour time of day display. The display will show either "12h" or "24h".
4.Wait 4 seconds to accept the change or press CANCEL pad to reject the change.
5.Reset the correct time as described in To set the Clock above. Please note that if the 24 hour time of day mode was chosen, the clock will now display time from 0:00 through 23:59 hours.
SETTING MINUTE TIMER
The TIMER ON.OFF pad controls the Minute Timer feature. The Minute Timer serves as an extra timer in the kitchen that will beep when the set time has run out. It does not start or stop cooking. The Minute Timer feature can be used during any of the other oven control functions. Refer to "Minimum and Maximum Control Pad Settings" for time amount settings.
To set the Minute Timer (example for 5 minutes)
1.Press TIMER ON.OFF.
2.Press 
or 
pad to set the desired time in the display.
3.Wait 4 seconds and the time will begin to count down with the set time and "TIMER" will stay in the display.
4.When the set time has run out, "End" will show in the display. The clock will sound with 3 beeps every 15 seconds until TIMER ON.OFF is pressed.
To cancel the Minute Timer before the set time has run out
1.Press TIMER ON.OFF. The display will return to the time of day.
SETTING ADD A MINUTE FEATURE
The ADD A MINUTE pad is used to set the Add 1 Minute feature. When the ADD A MINUTE pad is pressed, 1 minute is added to the Minute Timer feature if this feature is already active. If the Minute Timer feature is not active and the ADD A MINUTE pad is pressed, the Minute Timer feature will become active and will begin counting down from 1 minute.
TO OPERATE THE OVEN LIGHT
The interior oven light(s) will automatically turn ON when the oven door is opened.
Press 
to turn the interior light(s) ON and OFF whenever the door is closed.
12
