REMOVING AND REPLACING THE LIFT- OFF OVEN DOORS
CAUTION
The door is heavy. For safe, temporary storage, lay the door flat with the inside of the door facing down.
Most oven doors contain glass that can break. Read the following recommendations:
1.Do not close the oven door until all the oven racks are fully in place.
2.Do not hit the glass with pots, pans, or any other object.
3.Scratching, hitting, jarring or stressing the glass may weaken its structure causing an increased risk of breakage at a later time.
To Remove Oven Door:
1.Open oven door completely (horizontal with floor - See Figure 1).
Door Hinge locations
with oven door fully open
Figure 1
2.Pull the door hinge locks on both left and right door hinges down from the oven frame completely towards the oven door (See Figure 2). A tool such as a small
|
| K |
| C | |
O |
| |
L |
|
|
CARE & CLEANING
3.Firmly grasp both sides of oven door along the door sides (Do not use the oven door handle - See Figure 3).
Around
10° 
Oven door
Hinge
Figure 3
4.Close the door to the broil stop position (the oven door will stop into this position just before fully closing).
5.With the oven door in the broil stop position, lift the oven door hinge arms over the roller pins located on each side of the oven frame (See Figure 4).
Roller pin
Hinge arm hook
Hinge arm notch
Slot bottom
Figure 4
To Replace Oven Door:
1. Firmly grasp both sides of oven door along the door sides (Do not use the oven door handle - See Figure 3).
2. Holding the oven door at the same angle as the removal position, seat the hook of the hinge arm over the roller pins located on each side of the oven door frame (See Figure 4). The hook of the hinge arms must be fully seated onto the roller pins.
3. Fully open the oven door (horizontal with floor - See Figure 1).
4. Push the door hinge locks up towards and into the oven frame on both left and right oven door hinges (See Figure 2) to the locked position.
Figure 2
5. Close the oven door.
23
