Frigidaire 318205258 User Preferences, Adjusting Oven Offset Temperature, Setting Lockout Feature

ADJUSTING OVEN OFFSET TEMPERATURE

The temperature in the oven has been pre-set at the factory. When first using the oven, be sure to follow recipe times and temperatures. If you think the oven is cooking too hot or too cool for the temperature you select, you can adjust the actual oven temperature to be more or less than what is displayed. Before adjusting, test a recipe by using a temperature setting that is higher or lower than the recommended temperature. The baking results should help you to decide how much of an adjustment is needed.

To adjust the oven temperature:

1.Press and hold upper or lower oven BAKE pad for 6 seconds. The preset adjustment number will appear and "UPPER" or "LOWER" will flash in the display.

2.To increase the temperature use the pad to enter the desired change. The temperature may be increased as much as 35°F (19°C). To decrease the temperature use the pad to enter the desired change. The temperature may be decreased as much as 35°F (19°C).

3.Wait 4 seconds to accept the temperature change and the display will return to the time of day. Press CANCEL pad to reject the change if necessary.

USER PREFERENCES

SETTING SILENT CONTROL OPERATION

The DELAY START pad controls the Silent Control Operation feature. The Silent Control Operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.

To change control from normal sound operation to silent control operation:

1.Press and hold DELAY START pad for 6 seconds. A beep will sound, "-- --"will appear, "DELAY" will flash in the display. After 6 seconds, a beep will sound and "SP" (speaker) or "- -"will appear in the display.

2.Press or pad to switch between normal sound operation and silent operation mode.

Note: If "SP" appears, the control will operate with normal sounds and beeps. If "- -"appears, the control is in the silent operation mode.

3.Wait 5 seconds to accept the change or press CANCEL pad to reject the change.

Note: The control will always beep at the end of a minute timer and will beep when a set temperature has been reached, even if the control is set to silent operation.

NOTE

•Each oven temperature can be individually adjusted.

•The oven temperature adjustments made with this feature will not change the Self-Clean cycle temperature or the Broil temperature.

•The oven temperature adjustments are permanent and will stay forever in the unit memory unless you manually change it again. Even a power outage will not reset these changes. Follow the same procedure again if you wish to change it to a different setting.

SETTING LOCKOUT FEATURE

The CANCEL pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven doors (Self-cleaning ovens only) and prevents the oven from being turned on. It does not disable the display of the clock, the minute timer or the interior oven lights.

To activate the Lockout feature:

Make sure the oven doors are closed. Press and hold pad for 3 seconds. After 3 seconds a beep will sound,

"DOOR", "LOCKED" will flash, "Loc" and will appear in the display. Once the oven door is locked the "DOOR" and "LOCKED" indicator will stop flashing and remain in the display.

To reactivate normal operation:

Press and hold pad for 3 seconds. A beep will sound.

The oven icon, "LOC" and will disappear from the display. "DOOR" and "LOCKED" will flash in the display until the oven door has completely unlocked. The appliance is again fully operational.

17