Consumer Defined Controls
Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results. These
include the Oven Lockout, Silent Control Operation and Temperature Display features.

Setting Oven Lockout Feature

The _,_,_of!pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and
prevents the Oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights.
INSTRUCTIONS PRESS DISPLAY

To activate the Oven Lockout feature

1. Press and hold _,,_,_ for 3 seconds (Figure 1).
2. After 3 seconds "LOC" will appear, a beep will sound and
"DOOR LOCKED" will flash in the display. Once the oven door
is locked the "DOOR LOCKED" indicator will stop flashing and
remain on along with the "LOC".

To reactivate normal oven operation:

1. Press and hold _,,,a_ for 3 seconds. A beep will sound. "LOC"
will disappear and "DOOR LOCKED" will flash in the display
until the oven door has completely unlocked (figure 2).
_,,,,_ for 3 seconds
_[_,a,i_°_!for 3 seconds
2. The wall oven is again fully operational.
Figure 1
Figure 2

Setting Silent Control Operation

_tari tinle
The STARTTIME ...... c_.,
d_d_p_,and CLEAN _,_o_,padscontrol the Silent Control operation feature.The Silent Control operation
feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be
programmed for silent operation and later returned to operating with all the normal sounds and beeps.
INSTRUCTIONS PRESS DISPLAY

To change control from normal sound operation to

silent control operation

1. To tell if your range is set for normal or silent operation press
Start tilr_
and hold ,..... "0:00" will appear and "DELAY" will flash in the
de d_part •
display (Figure 3). After 7 seconds ":SP" will appear in the
display (Figure 4).
(:lean
2. Press ,_,,o,_,to switch between normal sound operation and dean Figure 4
silent operation mode. The display will show either ":SP" (Figure
4) or ":--" (Figure 5).
If ":SP" appears (Figure 4), the control will operate with normal
sounds and beeps. If ":- -" appears (Figure 5), the control is in
the silent operation mode.
3. Press toaccept the change or press to reject the
change.
Figure 5