Grill Assembly
Attaching Grill Head to Cart
1.While keeping the Grill on the foam base lean it onto its back. (be sure to hold the hood shut when doing this.) With the Grill on its back, loosen all 4 bolts on the bottom side of the Grill, but do not remove.(See Fig. 5)
2.Using 2 self tapping hex head screws, attach the magnetic door catch in the 2 holes in the bottom of the grill. (See Fig. 6)
3.Have someone help you pick up the grill
and set it on the top of the cart, with the front of the grill above the door opening. Make sure the 4 bolt heads fall through the large opening of the key hole slots in the top of the cart. Slide the grill head backward, so the bolts are resting in the small opening of the key hole slots. Tighten the bolts securely.
Be sure not to over tighten and strip the bolts. Next insert 4 hex head screws into grill bottom through cart. (See Fig. 7)
Note: This is a very heavy step that requires two individuals to complete.
Installing the Cart Door
1.While holding the door line up the bottom hole on the door with the bolt sticking up through base of cart. Next place a nylon bushing onto the top pin, then depress the pin and insert into the hole in the bottom of the grill. (See Fig. 8)
Screw hole for magnetic catch
Fig. 5
Bolts 
Catches face towards front of grill
Fig. 6
Screws
Fig. 7
Screw holes
Nylon Bushing | Fig. 8 |
Door Pivot Bolt |
|
|
|
6
