Grill Assembly
Installing the Cart Door Handles
1.Using a 5/32” allen wrench insert 1 screw through the inside of the door front into a bar handle end and tighten securely. (See Fig. 9)
2.Insert Bar Handle into the End Cap attached to the door and then into the other End Cap and tighten End Cap with allen wrench and screw. (See Fig. 10)
3.Complete Door. (See. Fig. 11)
Installing the Drip Tray
1.The drip pan is installed inside of the cart under the grill head.
2.Slide the drip pan onto the two ledges located on the bottom of the grill, by inserting it from the front of the cart. (See Fig. 12)
Slide onto rails |
| Front of |
under grill |
| Grill |
|
|
|
Fig. 12
7
Backside of door: 2 screw locations
Screw Holes
Fig. 9
End Cap
End Cap
Fig. 10
Bar Handle
Fig. 11
