Cycle Settings
For best results
Follow the fabric care label instructions on items to be dried.
Appropriate drying temperature, dryness level and options will automatically be displayed for each cycle. The settings can be modified before the cycle is started. Make modifications based on load size, dampness and fabric type and durability. Modifications for each cycle will be remembered and recalled each time that cycle is selected in the future.
To return to factory settings, press these two buttons at the same time and hold until the signal sounds.
If changes are attempted after the cycle starts, the lights will flash and a signal will beep, but the cycle will continue.
NOTE
To change the settings once the cycle has begun, push in the cycle selector knob to pause the cycle, make the new selections and push in the selector knob again to restart the dryer.
Drying Temperature
To change the preset temperature, press the temp button to scroll to the desired setting.
To protect your fabrics, not all temperatures are available with every cycle.
The temperature selected for the cycle will be remembered and recalled each time that cycle is selected in the future.
OPERATING INSTRUCTIONS
sanitize
Recommended for durable fabrics and towels. Use this selection to remove harmful bacteria from your clothing or other items where sanitization is desired.
This option will kill 99.9% of bacteria with no carryover of bacteria between loads. A higher temperatures is required. Please check fabric care labels to prevent damage.
NOTE
Only sanitizing cycles have been designed to meet the requirements of NSF P154 protocol for sanitization efficacy.
NSF Protocol P154
Sanitization Performance of
Residential Clothes Dryers
high
Recommended for most cotton fabrics.
normal
Recommended for wrinkle free, easy care, lightweight fabrics and bulky loads.
low
Recommended for delicate fabrics.
air dry
This setting (no heat) can only be selected with a timed cycle. The air dry setting tumbles the load without heat. Use this setting to dry items containing feathers, down, foam rubber, plastics or
Dryness Level (Auto Dry)
To change the preset level, press the dryness level button to scroll to the degree of dryness desired.
To protect your fabrics, not all dryness levels are available with every cycle. If a dryness level is not appropriate for the cycle, it cannot be selected.
The dryness level selected for the cycle will be remembered and recalled each time that cycle is selected in the future.
Select the normal dry level for most Auto Dry cycles.
Occasionally a load may seem too damp or
Select damp for items you wish to partially dry before hanging or ironing.
9
