Frigidaire FFEF4015LW Model B & C - Setting Main Oven Controls, The Oven Can Be Programmed To

MODEL B & C - SETTING MAIN OVEN CONTROLS

Control pad features

READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with the various features and functions of the oven as described below. Detailed instructions for each feature and function follow later in this Use & Care Guide.

NOTE

The oven function will not work if the time of day clock is not set.

					8
1	2		6	7	9
3	4	5	10	11	12

1.Clock pad—Use to set the time of day.

2.Bake time pad—Use to enter the length of the baking time.

3.Timer on-offpad—Use to set or cancel the Timer. The Timer does not start or stop cooking.

4.Start time pad—Used to set the desired start time for baking. Can be used with BAKE TIME to program a delayed bake cycle.

5.Oven, preheat & door locked lights— The “oven” light will glow each time the oven unit turns on maintain the set oven temperature. The “Preheat” light will glow when the oven is first set to operate, or if the desired temperature is reset higher than the actual oven temperature. The “Door Locked” light will flash until the door locks when the self-clean cycle is in use. It glows constantly after the door locks.

THE OVEN CAN BE PROGRAMMED TO

Bake normally, Time Bake, Delayed Bake, Broil, Self-Clean Note: Push buttons or pads may be shaped differently.

FOR A SILENT CONTROL PANEL

When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed for silent operation. Push and hold START TIME pad. After 7 seconds, the control will beep once. This will block the controls from sounding when a pad is pushed. To return the sound, push and hold START TIME pad again for 7 seconds until 1 beep is heard.

6.Up arrow pad—Used along with the function pads to select oven temperature, time of day and minute timer.

7.Bake pad—Use to select the bake cooking feature.

8.Feature indicator lights—These light to show which feature is in use.

9.Broil pad—Use to select the broil cooking feature.

10.Down arrow pad—Used along with the function pads to select oven temperature, time of day and minute timer.

11.Clear off pad—Use to cancel any oven feature previously entered except the time of day and minute timer.

12.Clean Pad—Used to select the self-cleaning cycle.

TEMPERATURE CONVERSION (Fahrenheit/Celsius) The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed for any temperature from 170°F to 550°F (77°C to 287°C).

To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):

1.Push BROIL pad. "- - - " appears in the display.

2.Push and hold the UP ARROW pad until "HI" appears in the display.

3.Push and hold BROIL pad until °F or °C appears in the display.

4.Push UP or DOWN ARROW pad to change °F to °C or °C to °F.

5.To accept the change, wait 6 seconds.

15