TEMPERATURE CONTROLS
•The default temperature for the wine cooler is 54°F (12°C). The temperature after power failure will be the temperature set before the power failure.
•To prolong the life of compressor, please wait for at least 5 minutes before the wine cooler is restarted after power failure.
Failure display
•If “E” and “F” are displayed, please contact local service personnel for repair.
•If the temperature in the cooler is too low, it will display “L”.
•If the temperature in the cooler is too high, the screen will display “H” and will flash. Under this state, the buzzer will buzz for 30 seconds. One minute later, the buzzer will continue to buzz for the next 30 seconds. After three times, the alarm will not buzz any more. You can press any key to cancel sound alarm.
•Storing too many wine bottles in the cooler may cause the temperature in the cooler to rise temporarily.
Temperature Control for Dual Zone Model
lower | Temperature in lower chamber indicator | : | Temperature display |
zone |
|
| |
|
|
| |
| Press this button once to increase temperature 1° F/C. | Light: This LED turns the light ON and OFF. | |
|
| ||
: | Press this button once to decrease temperature 1° F/C. | Power: This LED turns the power ON and OFF. | |
upper zone
:
Temperature in upper chamber indicator | Press both Light and Power LED’s at the same time to |
| |
Press this button once to increase temperature 1° F/C. | change between fahrenheit and Celsius temperatures. |
Press this button once to decrease temperature 1° F/C. |
|
The wine cooler can be operated by adjusting the temperature control buttons (up arrow and down arrow) until the desired temperature is reached.
The display will flash for a few seconds before set point is locked in.
•The default temperature is 46°F (8°C) for upper zone and 59°F (15°C) for lower zone. The temperature after power failure will be the temperature set before the power failure.
•To prolong the life of compressor, please wait for at least 5 minutes before the wine cooler is restarted after power failure.
The temperature range MIN and MAX is 41 - 54° F for the upper zone and 54 - 64° F for the lower zone.
Failure display
•If “E” and “F” are displayed, please contact local service personnel for repair.
•If the temperature in the cooler is too low, it will display “L”.
•If the temperature in the cooler is too high, the screen will display “H” and will flash. Under this state, the buzzer will buzz for 30 seconds. One minute later, the buzzer will continue to buzz for the next 30 seconds. After three times, the alarm will not buzz any more. You can press any key to cancel sound alarm.
•Storing too many wine bottles in the cooler may cause the temperature in the cooler to rise temporarily.
7
