Frigidaire FPES3085KF, FGES3065KF, FGES3065KB, FGES3045KF Setting SELF-CLEAN Cycle Time Length

SETTING OVEN CONTROLS

SETTING SELF-CLEAN CYCLE TIME LENGTH

The SELF CLEAN pad controls the Self-Cleaning feature. If you are planning to use the oven directly after a self-clean cycle remember to allow time for the oven to cool down and the oven door to unlock. This normally takes about one hour. So a 3 hour self-clean cycle will actually take about 4 hours to complete.

*It is recommend to use a 2 hour self-clean cycle for light soils, a 3 hour cycle for average soils, and a 4 hour cycle for heavy soils (to assure satisfactory results).

To set the controls for a 3 hour Self-Cleaning cycle

to start immediately and shut off automatically

1.Be sure the clock is set with the correct time of day and the oven door is closed.

2.Press SELF CLEAN. “CLn” and “3:00” HR will show in the display. The control will automatically clean for a 3 hour period (default self-cleaning cycle time).

 NOTE

If a 2 or 4 hour clean time is desired, press SELF CLEAN multiple times to toggle between 2, 3 or 4 hours.

3.Press START. “door Loc” will appear, a beep will sound and the “DOOR” and icon will flash; the letters “CLn” will remain on in the display.

4.As soon as the control is set, the motor driven oven door lock will begin to close automatically. Once the door has been locked the “DOOR” indicator light and icon will stop flashing and remain on. Also, the oven

icon will appear in the display.

 NOTE

Allow about 15 seconds for the oven door lock to close.

When the Self-Clean Cycle is Completed

1. “HOT” will appear in the display. The time of day, the “DOOR” and icon will remain in the display.

2.Once the oven has cooled down for approximately 1 HOUR, “door OPn” will appear and the “DOOR” and icon will flash until the door is unlocked, the oven door can then be opened and the timer will revert back

to the time of the day.

Stopping or Interrupting a Self-Cleaning Cycle

If it becomes necessary to stop or interrupt a self-cleaning cycle due to excessive smoke or fire in the oven:

1.Press CANCEL.

2.The oven door can only be opened after the oven has cooled down for approximately 1 HOUR, “door OPn”

will appear and the “DOOR” and icon will flash until the door is unlocked, the oven door can then be opened and the timer will revert back to the time of the day.

The SELF CLEAN and DELAY START pads controls the Delayed Self-Clean operation. The automatic timer will turn the oven on and off at the time you select in advance.

To set the control for the Self-Cleaning Cycle to start at a delayed time and shut off automatically (example: 3 hour self-clean cycle to start at 4:30)

1.Be sure the clock is set with the correct time of day and the oven door is closed.

2.Press SELF CLEAN. “CLn” and “3:00” HR will show in the display. The control will automatically clean for a 3 hour period.

 NOTE

If a 2 or 4 hour clean time is desired, press SELF CLEAN multiple times to toggle between 2, 3 or 4 hours.

3.Press START. “door Loc” will appear, a beep will sound and the “DOOR” and icon will flash; the letters “CLn” will appear in the display as soon as the door is locked.

4.As soon as the control is set, the motor driven oven door lock will begin to close automatically. Once the door has

been locked the “DOOR” and icon indicator light will quit flashing and remain on.

5.Press DELAY START. Enter the desired start time using the number pads 4 3 0.

6. Press START. “DELAY”, “DOOR” and icon icons will remain on.

7.The control will start the self-cleaning at the set start time, for the period of time previously selected. At that time, the icon “DELAY” will go out; “CLn” and oven icon will appear in the display.

When the Self-Clean Cycle is Completed

1. “HOT” will appear in the display. The time of day, the “DOOR” and icon will remain in the display.

2.Once the oven has cooled down for approximately 1 HOUR, “door OPn” will appear and the “DOOR” and icon will flash until the door is unlocked, the oven door can then be opened and the timer will revert back

to the time of the day.

Stopping or Interrupting a Self-Cleaning Cycle

If it becomes necessary to stop or interrupt a self-cleaning cycle due to excessive smoke or fire in the oven:

1.Press CANCEL.

2.The oven door can only be opened after the oven has cooled down for approximately 1 HOUR, “door OPn”

will appear and the “DOOR” and icon will flash until the door is unlocked, the oven door can then be opened and the timer will revert back to the time of the day.

 NOTE

Models B & C only, during self-clean cycle surface elements can not be used (see ESEC Lockout Feature)

34