Frigidaire FGHF2366PF, FGHB2866PF, FPHB2899PF Sabbath Mode, Controls,  Note

Models: FPHB2899PF FGHF2366PF FGHB2866PF

1 33
Download 33 pages 44.46 Kb
Page 16
Image 16
Sabbath Mode

CONTROLS

Setting cooling temperatures

NOTE

When you first power on the refrigerator, the temperature displays 0° F and 37° F. After a few seconds, both of the displays will switch to “HI”. The displays will continue to show “HI” for 20 minutes. After 20 minutes, the High Temp alarm will sound and both displays will show the actual temperature.

1Plus (+) and Minus () indicators are located on the right side of the control panel.

2Press the + or indicator to adjust the temperature to the desired setting.

Alarms

Power Failure In the event of a power failure, the power fail alert will be illuminated. Press alarm reset to acknowledge the alarm. Other modes may be turned off until the alarm is acknowledged. When the power fail alert is acknowledged, the refrigerator will resume normal op- eration. The high temp alarm may also be illuminated until a safe operating range temperature has been reached.

Freezer Temp If the freezer temperature reaches 26° F or greater, the alarm will sound and the temperature will flash. You can disable the alarm by pressing the set key but the “High Temp” indicator will illuminate until the temperature goes below 26° F.

Fresh Food Temp If the fresh food temperature reaches 55° F or greater, the alarm will sound and the temperature will flash. You can disable the alarm by pressing the set key but the “High Temp” indicator will illuminate until the temperature goes below 55° F.

Door Ajar

If the freezer or fresh food doors have

 

been left open for five minutes or more,

 

an alarm will sound and the door ajar

 

indicator will illuminate on the display.

 

Press the set key to reset any system

 

alarms.

Flapper

When “Cube” or “Crush” is selected, if

 

the flapper (or ice chute door) is being

 

held open by a jammed ice cube, an

 

alarm will sound for two minutes. The

 

alarm will reset after two minutes or

 

when the ice cube is removed and the

 

set key is pressed to reset.

Sabbath Mode

The Sabbath Mode is a feature that disables portions of the refrigerator and its controls in accordance with observance of the weekly Sabbath and religious holidays within the Orthodox Jewish community.

Sabbath Mode is turned ON and OFF by pressing and holding both the “” and “+” for five seconds. The display shows “Sb” while in Sabbath mode.

In the Sabbath Mode, the High Temp alarm is active for health reasons. If a high temperature alarm is activated during this time, for example due to a door left ajar, the alarm will sound intermittently for about two minutes.

The alarm will then silence on its own and a red high temperature icon will display. The high temp icon will continue to display, even if the door is closed, until the Sabbath mode is exited and the icon reset. The refrigerator will function normally once the door is closed, without any violation of the Sabbath/Holidays.

For further assistance, guidelines for proper usage and a complete list of models with the Sabbath feature, please visit the web at http:\\www.star-k.org.

NOTE

While in Sabbath Mode, neither the lights, dispenser, nor the control panel will work until Sabbath Mode is deactivated.

Refrigerator stays in Sabbath Mode after power failure recovery. It must be deactivated with the buttons on the control panel.

NOTE

Although you have entered the Sabbath Mode, the ice maker will complete the cycle it had already initiated. The ice cube compartment will remain cold and new ice cubes can be made with standard trays.

16

Page 16
Image 16
Frigidaire FGHF2366PF, FGHB2866PF, FPHB2899PF important safety instructions Sabbath Mode, Controls,  Note