Frigidaire FGHF2366PF CARE & CLEANING Care and cleaning tips, Ice Chute Extension select models

CARE & CLEANING

Care and cleaning tips

Part	Cleaning Agents	Tips and Precautions
Interior &	• Soap and water	• Use two tablespoons of baking soda in one quart of warm water.
Door Liners	• Baking soda and	• Be sure to wring excess water out of sponge or cloth before cleaning
	water	around controls, light bulb or any electrical part.
Door	• Soap and water	• Wipe gaskets with a clean soft cloth.
Gaskets
Drawers &	• Soap and water	• Use a soft cloth to clean drawer runners and tracks.
Bins		• Do not wash any removable items (bins, drawers, etc.) in dishwasher.
Glass	• Soap and water	• Allow glass to warm to room temperature before immersing in warm water.
Shelves	• Glass cleaner
	• Mild liquid sprays
Toe Grille	• Soap and water	• Remove toe grille (see Installation Instructions).
	• Mild liquid sprays	• Vacuum both sides and wipe with sudsy cloth or sponge. Rinse and dry.
	• Vacuum
Exterior &	• Soap and water	• Do not use commercial household cleaners containing ammonia, bleach or
Handles	• Non abrasive glass	alcohol to clean handles.
	cleaner	• Use a soft cloth to clean smooth handles.
		• Do not use a dry cloth to clean smooth doors.
Exterior &	• Soap and water	• Never use CHLORIDE or cleaners with bleach to clean stainless steel.
Handles	• Stainless steel	• Clean stainless steel front and handles with non-abrasive soapy water and
(Stainless	cleaners	a dishcloth. Rinse with clean water and a soft cloth.
Steel Models		• Use a non-abrasive stainless steel cleaner. These cleaners can be
Only)
		purchased at most home improvement or major department stores. Always
		follow manufacturer’s instruction. Do not use household cleaners containing
		ammonia or bleach.
		NOTE: Always clean, wipe and dry with grain to prevent scratching.
		• Wash the rest of the cabinet with warm water and mild liquid detergent.
		Rinse well and wipe dry with a clean soft cloth.

Ice Chute Extension (select models)

The ice chute extension is designed to better direct ice flow into containers.

Removing the Ice

Chute Extension

For Cleaning

1 Turn the refrigerator

off using the button

Installing the Ice

Chute Extension

1Turn the refrigerator off using the button on the control panel (refer to the “Controls” section of this Manual).

2Align the extension with the ice chute so that the snap clips are just inside the front edge of the chute.

Push Upward Until the

Extension Snaps In Place

on the control

panel (refer to the

“Controls” section of

this Manual).

2Press inward firmly on the front of the chute and pull down.

3Turn your refrigerator back on.

Press Here Firmly

Pull Down

3 Push upward until the extension snaps into place.

4 Turn your refrigerator back on.

28