INSTALLATION

Door Opening

NOTE

The refrigerator doors are designed to shut by themselves within a 20 degree opening.

Your refrigerator should be positioned to allow easy access to a counter or table when removing food. For best use of drawers and freezer baskets, the refrigerator should be in a position where both the refrigerator and freezer doors can be fully opened.

Guidelines for final positioning of your refrigerator:

•All four corners of the cabinet must rest firmly on the floor.

•The cabinet should be level at the front and rear.

•The sides should tilt ¼ inch (6 mm) from front to back (to ensure that doors close and seal properly).

•Doors should align with each other and be level.

All of these conditions can be met by raising or lowering the adjustable front rollers.

To level the cabinet using the front rollers:

1Open both doors and remove the toe grille (see “Toe Grille Installation and Removal” in the “Installation” section).

2Close the doors and use a flat-blade screwdriver or

3/8 inch socket wrench to raise or lower the front rollers.

3Ensure both doors are bind-free with their seals touching the cabinet on all four sides.

To level the doors using the adjustable lower hinge (some models):

1Before leveling either door, remove set screw that locks door height into position. (The door cannot be adjusted without set screw removed).

2If the refrigerator door is lower than the freezer door, raise the refrigerator door by turning the adjustment screw clockwise using a 7/16 inch wrench. (See illustration.)

3If the freezer door is lower than the refrigerator door, raise the freezer door by turning the adjustment screw clockwise using a 7/16 inch wrench. (See illustration.)

4After leveling, verify door stop contacts lower hinge and top of door does not contact upper hinge through full movement of door (from fully closed to fully open).

5Reinstall set screw, locking the door height.

 

 

Open Door

7/16” Wrench

 

 

and 3/32” Hex Key

Door Stop

 

(some models)

 

Flange

Hinge

 

 

 

 

 

Flange

 

 

Set Screw

 

 

(some models)

 

 

Hinge

6Replace the toe grille by fitting it into place

(see “Toe Grille Installation and Removal” in the “Installation” section).

6

Page 5 Page 7
Page 6
Image 6
Frigidaire FGHC2335LE, FGHS2332LE, FGHS2332LP Door Opening, Guidelines for final positioning of your refrigerator
Page 5 Page 7

FGHS2332LP, FGHS2332LE, FGHC2335LE specifications

The Frigidaire FGHC2335LE, FGHS2332LE, and FGHS2332LP are three prominent models in Frigidaire's lineup of stylish and efficient refrigerator options designed to elevate kitchen spaces while providing practical features for modern living. These models are equipped with a variety of technologies and characteristics that make them standout choices in the crowded appliance market.

First and foremost, the Frigidaire FGHC2335LE is known for its spacious interior and flexibility. With a generous total capacity of approximately 36 cubic feet, this side-by-side refrigerator features ample storage space to accommodate all of your groceries. Its adjustable shelving system allows users to customize the internal layout, enabling efficient organization of perishable items. The integrated water and ice dispenser provide chilled water and cubed or crushed ice on demand, promoting convenience and encouraging hydration.

Similarly, the FGHS2332LE and FGHS2332LP models also boast impressive capacities, making them ideal for families or individuals who frequently entertain guests. The features like the dual ice makers and plenty of door bins facilitate easy access to frequently used items, simplifying meal prep and joyful cooking experiences in the kitchen. The stainless steel finish not only adds elegance to kitchen décor but also ensures easy maintenance, allowing users to maintain a sleek look without much effort.

These models employ advanced cooling technologies, including the EvenTemp cooling system, which evenly distributes air throughout the refrigerator to maintain optimal temperatures and minimize temperature fluctuations. This technology contributes to longer-lasting freshness for food items, reducing waste and ensuring that groceries stay crisp and flavorful.

Energy efficiency is another hallmark of the FGHC2335LE, FGHS2332LE, and FGHS2332LP. These refrigerators meet or exceed ENERGY STAR standards, signifying that they use less energy than conventional models, helping consumers save money on utility bills while being environmentally responsible.

In terms of accessibility, these models feature easy-to-read LED lighting that illuminates the interior, allowing users to quickly locate items even in low-light conditions. The refrigerators also include humidity-controlled crisper drawers that provide the ideal environment for fruits and vegetables, preserving their freshness for longer.

Overall, the Frigidaire FGHC2335LE, FGHS2332LE, and FGHS2332LP combine style, functionality, and efficiency, making them exceptional choices for anyone looking to upgrade their kitchen appliances. With an array of innovative features and a focus on user-friendly design, these refrigerators are well-equipped to meet the demands of modern lifestyles.
Top Page Image Contents