![](/images/new-backgrounds/1105106/105106165x1.webp)
Service Manual |
LOWER HOUSING
1. Remove the UPPER HOUSING. See page
2. Remove the CENTER HOUSING. See page
3. Remove the FAN, KEYBOARD PCB and TRAY MOTION PCB. See page
4. Remove the TRANSFORMER, POWER SUPPLY PCB and BACK PANEL ASSEMBLY. See page
5. Remove the MECHANISM FRAME and LENS MOUNT. See page
6. Disconnect all CONNECTORS from MASTER PCB. See page
7. Remove the 2 SCREWS and the LAMP HOUSING ASSEMBLY.
8. Remove the HANDLE.
9. Remove the 2 ELEVATOR RETAINERS, the right and left ELEVATOR KNOB, the right and left ELEVATOR and the 2 RUBBER FEET.
LAMP HOUSING
ASSEMBLY
SCREW (2)
ELEVATOR RETAINER (2)
ELEVATOR KNOB (2)
HANDLE
ELEVATOR (2)
RUBBER FOOT (2)
figure
Kodak AG, Stuttgart | 03/98 |