
Service Manual |
MICROCONTROLLER
1. Remove the UPPER HOUSING. See page
2. Remove the CENTER HOUSING. See page
3. Remove the SCREW and the COVER.
4. Use a PLCC EXTRACTOR TOOL (TL 4430) to remove the MICROCONTROLLER from the
MASTER PCB.
5. When assembling note the beveled edge of the MICROCONTROLLER and the
MICROCONTROLLER
PLCC EXTRACTOR
TOOL (TL 4430)
COVER
SCREW
NOTE
The MICROCONTROLLER is installed in a
03/98 | Kodak AG, Stuttgart |