SM | Service Manual |
6. Projector Checking
1. Power on the Projector. If there is no function and no initialization procedure, check the primary and the secondary Fuse F1 and F2.
Slide jam (all models)
2. To avoid slide jams check the position of the DRIVE RING. Use FIXTURE TOOL TL 622 0454 to adjust the TRAYMOTION PCB how it is described in Modification Instruction No.1
NOTE
Take care of the spring located at the rear side of the Metal Slide (see figure
outside of the Slide Gate.
Nose
Turn the tool cw
Align the tool
Gap
Metal Slide
LAMP MODULE
figure
KODAK AG, Stuttgart | 01/97 |