Frigidaire 137147600 B (0906) Cu ft Dryer Style 2 Instructions Green KIT, D3 Mounting dryer style

5.8 cu ft DRYER (STYLE 2) INSTRUCTIONS (GREEN KIT)

C3) Attaching dryer (style 2) mounting hardware

1.Use the following instructions for mounting any of these types of dryers to the pedestal:

Dryer cabinet (style 2) with 2 indents on side and 4 inch knockout for side venting.

2.Attach each front clip to outer-most set of holes with 2 screws.

NO spacers under front brackets.

3.Insert “B” tab of each rear bracket into the front slots on rear of pedestal. Orient bracket outward for “style 2” dryer mounting.

“B”

tab front slot

outward

4.Install 2 screws through each rear bracket into aligning pedestal holes.

D3) Mounting dryer (style 2)

- EXCESSIVE WEIGHT HAZARD - To avoid back or other injury, have more than one person move or lift the dryer.

1.Using two or more persons, slightly tip the dryer back and lift it onto the pedestal. Still tipped, slide the dryer back against the rear brackets so tabs on rear brackets engage the slots on the back of the dryer. Gently set down the front so the appliance is between the front and rear brackets.

ENGAGE REAR TABS

SLIDE BACK

TIP DOWN

2.Adjust the appliance side-to-side to align its mounting holes with the pedestal’s bracket holes.

3.Install a screw through each front bracket into the base of the dryer.

E3) Installing or re-installing dryer (style 2)

1.Slide appliance/pedestal into place.

2.Check for levelness and rock all four (4) legs again. Repeat until level and solid.

3.Refer to Dryer Installation Instructions for complete details on installing electrical, gas, or exhaust venting.

• GREEN KIT • GREEN KIT • GREEN KIT • GREEN KIT • GREEN KIT •

5