Installation

This Owner’s Guide provides specific operating instructions for your model. Use the refrigerator only as instructed in this Use & Care Manual. Before starting the refrigerator, follow these important first steps.

LOCATION

•Choose a place that is near a grounded electrical outlet. Do Not use an extension cord or an adapter plug.

•If possible, place the refrigerator out of direct sunlight and away from the range, dishwasher or other heat sources.

•The refrigerator must be installed on a floor that is level and strong enough to support a fully loaded refrigerator.

•Consider water supply availability for models equipped with an automatic ice maker.

INSTALLATION

Do Not install the refrigerator where the temperature will drop below 55°F (13°C) or rise above 110°F (43°C). The compressor will not be able to maintain proper temperatures inside the refrigerator.

Do Not block the toe grille on the lower front of your refrigerator. Sufficient air circulation is essential for the proper operation of your refrigerator.

Installation Clearances

•Allow the following clearances for ease of installation, proper air circulation, and plumbing and electrical connections:

Sides & Top --------------- 3/8” Back ------------------------ 1”

DOOR OPENING

NOTE: If your refrigerator is placed with the door hinge side against a wall, you may have to allow additional space so the door can be opened wider.

Your refrigerator should be positioned to allow easy access to a counter when removing food. For best use of drawers and freezer baskets, the refrigerator should be in a position where both the refrigerator and freezer doors can be fully opened.

TOE GRILLE INSTALLATION / REMOVAL

To Remove Toe Grille:

1.Open freezer and fresh food compartment doors.

2.Working from left side of toe grille, slip your fingers between top of toe grille and cabinet. Gently pull forward until first set of tabs are free. Slide your hand down past the free tabs and pull forward again until the second set of tabs are free. Continue this process until all tabs are free and the toe grille can be removed. (See graphic at top of page in right column.)

To Install Toe Grille:

1.Open freezer and fresh food compartment doors.

2.Line up toe grille at

base of refrigerator, making sure the four bottom tabs are resting through holes at base of cabinet.

3.Starting from left side

of toe grille, press in on first top tab using your thumb and push toe grille forward until it snaps in place. Continue this process until all tabs aresnapped in place and toe grille is secured to refrigerator.

LEVELING

All four corners of your refrigerator must rest firmly on a solid floor. Your refrigerator is equipped with adjustable front rollers to help level your unit.To ensure proper door seal and assist door closing, the refrigerator should be tilted 1/4” (6 mm), front to back.

To Level Your Refrigerator:

1.Remove toe grille. (See “To Remove Toe Grille” .)

2.Use flat-blade screwdriver or 3/8” socket wrench to adjust front rollers.

NOTE: The refrigerator doors are designed to shut by themselves within a 20 degree opening.

3.Check both doors to be sure seals touch cabinet on all four sides.

4

Page 3 Page 5
Page 4
Image 4
Frigidaire FSC23F7DSB1, FSC23BBDSB0, FSC23F7DB0, FSC23F7DSB0, FSC23BBDSB1 manual Installation
Page 3 Page 5

FSC23F7DB0, FSC23BBDSB0, FSC23F7DSB1, FSC23F7DSB0, FSC23BBDSB1 specifications

Frigidaire has long been synonymous with innovation and quality in the appliance industry, and their line of refrigerators including the FSC23BBDSB1, FSC23F7DSB0, FSC23F7DSB1, FSC23BBDSB0, and FSC23F7DB0 exemplifies these qualities.

These models showcase a modern, sleek design, perfect for any contemporary kitchen. One of the primary features is spacious storage capacity, allowing homeowners to organize their groceries conveniently. With adjustable shelving and door bins, users can customize the interior layout based on their needs.

Energy efficiency is another hallmark of these Frigidaire models. Each unit is designed with energy-saving technologies that not only help reduce electricity bills but also promote sustainable living. The ENERGY STAR rating on these refrigerators highlights their commitment to energy efficiency, making them an eco-friendly choice for the environmentally conscious consumer.

In terms of temperature management, these refrigerators feature advanced cooling systems that ensure consistent temperatures throughout the unit. This is crucial in maintaining the freshness of food and beverages. The models come equipped with an automatic defrost feature, minimizing the need for manual intervention and ensuring optimal performance.

The stainless steel finish gives the refrigerators a premium look, while also being easy to clean and resistant to fingerprints. This aesthetic appeal is matched by practicality, as the units often include LED lighting that illuminates the interior, making it easier to locate items even in low light.

Technology is also a standout aspect of the FSC23 series. Many of these models feature smart capabilities, allowing users to control and monitor their refrigerators remotely. Whether adjusting temperatures, receiving alerts about issues, or managing grocery inventory, modern connectivity enhances user convenience.

Additionally, these refrigerators often come with specialized compartments, such as humidity-controlled crispers for fruits and vegetables, as well as dedicated meat drawers, ensuring food stays fresh for longer periods.

Overall, the Frigidaire FSC23 series represents a blend of style, efficiency, and advanced technology, making them an excellent choice for anyone in the market for a reliable and stylish refrigerator. With a commitment to quality and innovation, Frigidaire continues to set benchmarks in the home appliance industry.
Top Page Image Contents