Item
Required when installing the mounting
bracket over the wall with the unicorn
anchor
16
Coaxial cable UL Listed NEC type CM or
CL2, RG-6/U type
Recommended distance: 20 m
{65.6 ft.} or less
Use
For connection between an external
video-input device and the iris camera
Connect both ends with BNC plugs.
Power cable
Item number/Recommended type
UL style 1015 (AWG 14-18) or
equivalents
Maximum distance: 10 m {32.8 ft.}
Necessary when supplying power from
the external power-supply device to
the iris camera
Solder both ends of the cable with M3
screw clamp terminals.
LAN cable UL style 1666, CSA-FT4 or equivalents
10 Base-T/100 Base-TX (Category 5)*
Necessary for communication between
the iris cameras and iris server
Anchor bolt M6
■Preparation
Prepare the following items before the installation. The necessary items and their lengths differ depending on situation.

●Preparing the Necessary Items

* Only cables without connector covers are usable.
Note: When you use the alarm output and Wiegand terminals, you need optional cables suited for the connectors of the exter-
nal devices. Use the UL style 1571 or equivalents, AWG 22 - 16 wire.

●Cable Preparation

Power cable (with sealing)
■ Notification about the Installation Site
This iris camera is limited to indoor use.
Near-infrared light (contained in sunlight, incandescent light and halogen light) are used for iris image capturing by the iris
camera. If the iris camera is installed in a place which receives this light directly, it may cause invalid iris data
enrollment/recognition, as the camera cannot capture iris images properly.
Keep the iris camera away from the following. Otherwise, light may affect on the iris camera.
•Outdoor places
•Direct sunlight or light reflection
•Incandescent or halogen lighting
•Places where the iris camera or the user's eyes are directly exposed to light
Note: A quantity of acceptable near-infrared ray is 500 µW/cm2or less.
•Places near the light reflection (from a mirror, etc.)
•Places where the amount of light is not appropriate for operation
25 mm {1 in.} or less