Panasonic BM-ET300AE operating instructions External View, Front View

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

■External View

●Front View

qMirror

This mirror is used for eye positioning at the time of iris data enrollment/recognition. View the mirror from the front side where you can position both eyes in the mir- ror.

wGuide indicator

When a user comes within 50 cm {1.64 ft.} of the front of an iris camera, this indicator will appear in the mirror for guidance. Adjust your eye position by following the guide indicator or voice guidance from the speaker.

eFront panel

Eye image capturing cameras and a near-infrared light are located behind this panel. Depending on the user, the near-infrared light (blinking red light) can be seen.

Notes:

•Avoid covering the front panel with a hand or cloth, etc. That may cause invalid recognition.

•Avoid pinching objects between the front panel and the main unit. That may cause a malfunction.

rEye image capturing cameras

These cameras, which are located behind the front panel, are used for eye image capturing.

Note: Avoid covering these cameras with a hand or cloth, etc. Or avoid placing smudges on these cam- eras. It may cause invalid recognition.

tResult indicators

These indicators inform you of recognition results. ACCEPT: This indicator lights up when recognition is

successfully completed.

REJECT: This indicator lights up when recognition is not successfully completed or the user's iris data is not enrolled in the iris camera.

yVideo surveillance camera

This colour camera, which is located behind the front cover, is used for facial monitoring. If you connect this camera to external equipment such as a digital disk recorder, you can record user's face and surroundings to check the capturing condition.

uLive indicator

This indicator is blinking during standby. The blinking speeds up when a user stands where he/she can see both eyes in the mirror and guidance starts. The indica- tor can be set to be continuously on or off. Refer to sys- tem administrators for details on the settings.

wq

e

!0

r

REJECT	ACCEPT
t
	o
y	i

u

!1

iSpeaker

This speaker outputs voice guidance that guides a user’s position and gives the recognition result. The voice guidance can be set to any of the following. Refer to system administrators for details on the settings.

Mute: Voice guidance is not output.

Simple: Shutter sound and recognition result are out- put. Voice guidance is not output.

Full: Voice guidance, shutter sound, and recognition result are output.

oAudio volume controller

This controller adjusts the audio level of voice guid- ance. For adjustment, use a Phillips screwdriver that is 3 mm {0.12 in.} in diameter and more than 25 mm {0.98 in.} long. It is recommended to use a non-conductive driver.

Note: Avoid adding excessive force to the screwdriver. That may damage the audio volume controller.

!0Tilt handles

You can adjust the angle of the front panel by holding these handles. Adjust the handles so as to position both eyes at the centre of the mirror.

!1Front cover

This cover is removed at the time of installation, con- nection or maintenance. Users should not open it. (Refer to service personnel when the front cover needs to be opened.)

11