Panasonic BM-ET300AE Precautions, General Safety Requirement, To avoid fire or personal injury

0 °C to 40 °C {32 °F to 104 °F}

30 % to 80 % relative humidity, non- condensing

12 V DC/24 V AC

PRECAUTIONS

General Safety Requirement

For Installation:

Refer all work related to the installation of the product to qualified service personnel or system installers.

Consult an expert for help in evaluating load bearing capacity of the installation surface and structure. If the sur- face is not strong enough, the camera may fall down. Refer to the product specifications for weights.

To avoid fire or personal injury:

•Do not drop metallic parts through slots. This could permanently damage the product.

•Do not attempt to disassemble the product.

There are no user-serviceable parts inside. Panasonic is not responsible for regulatory compliance of a disas- sembled Panasonic product by unauthorized person- nel. Contact qualified service personnel for mainte- nance.

•Do not strike or shake the product.

Handle the appliance with care, or it could cause the trouble of it.

•Do not expose nor operate the product in wet/damp conditions.

Take immediate action if the product gets wet. Refer servicing to qualified service personnel. Moisture could damage the product and also cause electric shocks.

•Do not use strong or abrasive detergents when cleaning the product.

Use soft and dry cloth to clean the product when it is dirty. When the dirt is hard to remove, use a mild deter- gent and wipe gently.

•Do not use the product beyond operating requirements.

It is designed to operate properly for environment spec-

ified below: Temperature Humidity

Source voltage

Important notes specific to the product:

•This unit has no power switch.

Power is supplied from an external 12 V DC/24 V AC power-supply device. Refer to service personnel for how to turn on/off the power.

Note: While the power is turned off, recognition and entrance will NOT be available.

•The third-party external power supply should meet the specifications. (Refer to p. 33.)

•Replacement part

Exchange the following parts for the same type. F1: K5D402BK0002

•Adopting tamper-proof structure.

Refer to service personnel for relocating or servicing the unit.

As the unit has been designed in tamper-proof struc- ture, buzzer sound will be activated with alarm notifica- tion when you try to open the front cover or detach the camera from the wall. Then, recognition will become unavailable, the alarm notification will also be sent to the iris server, and the stored data may be erased from the unit.

•Use of near-infrared ray

Near-infrared ray is used when iris data are captured by the unit. The near-infrared ray is compliant with the radiological safety standard of IEC60825-1.

•Indication label

Refer to the indication placed on the bottom of the product as to the indications of equipment classification and power source, etc.

•This product is not designed to prevent theft.

The product is designed to perform roles of capturing personal iris data, of recognizing individuals and of pro- ducing output signals only. To ensure your entrance/gate security, you must use the product together with other security system or devices including electric locks.

Panasonic is NOT RESPONSIBLE FOR ANY CRIME OR TROUBLE CAUSED BY USING THIS UNIT.

•In some cases, recognition or enrollment doesn’t work properly.

It could be invalid in recognition or enrollment when the camera has difficulty in getting iris information due to dirt in front of lens, reflection of glasses or insufficiency of physical requirement.

•Iris data is a nature of privacy.

Take enough care not to leak the data out of the iris server. It is also recommended that you should get an agreement from a person to register his or her data.

9