Introduction
About the Modem Charging Cradle
The Modem Charging Cradle enables a telephone connection to a host computer. Palm Tungsten E2 handheld users can access and transfer critical information as easily as making a phone call. The cradle communicates via serial transmission with the Palm handheld. Before it can transfer data over the telephone line, the cradle will require third party software to be installed on the handheld.
NOTE
Palm does not support HotSync over a serial connection, thus HotSync is not a supported application for this device.
Minimum Requirements
The following minimum requirements must be met for the network, handheld and desktop computer to work together:
•Palm Tungsten E2 or compatible handheld
•Power Adapter
•Modem Charging Cradle
•RJ11 phone cable
•A desktop computer connected to a V.34 (or later) modem.
Product Registration
Thank you for purchasing this iGo product. We strongly encourage you to register this product so that we may keep you notified of pertinent updates and relevant product information. Failure to register does not diminish your warranty rights. We provide free product support to registered users for the first 90 (ninety) days from the purchase date.
Registration may be completed online at: www.igo.com/registration.
More about the Box Contents
Modem Charging Cradle
The Modem Charging Cradle is designed for and communicates serially with the Palm Tungsten E2 or compatible handheld.
The cradle’s
•A power receptacle for its power adapter.
•A Line In phone jack that connects the wall (or telephone company) line into the device.
•A Line Out phone jack that passes the signal through the device to a phone or other device that shares the line.
User’s Guide for Modem Charging Cradle PS6PMCM | 4 |
