Cradle/Cable

Configuring the Network Manager for Modem Communication

Perform the following steps:

1.Create a Point-to-Point Protocol (PPP) connection with a remote computer by doing these steps:

•On the remote computer, create a connection that will accept incoming connections.

•Set the incoming connection device to PC Modem.

•Verify that both, user information and permissions are correct.

•Ensure that the incoming connection has a properly assigned IP address.

2.Configure the Palm Tungsten E2 to work with the Modem Charging Cradle:

•Open Preferences from the Palm OS Main Menu.

•Select Communication Connection.

•Create a new connection using these settings:

− Name: Custom

−Connect to: Modem

− Via:

•Select OK to save the new connection

•Open Preferences from the Palm OS Main Menu

•Select Communication Network then insert these settings:

−Service: PSINet

−User Name: <Enter PC User’s Name> who’s being connected

−Password: <Enter same PC User’s Password>

−Connection: Custom

−Phone: <Enter Phone Number of Remote PC>

User’s Guide for Modem Charging Cradle PS6PMCM