For Your Safety

QQ This product, which contains encryption function developed in the United States, is controlled by the United States Export Administration Regulations and may not be exported or re-exported to any country to which the United States embargoes goods.

•Use only as part of a wireless network. FUJIFILM does not accept liability for damages resulting from unauthorized use. Do not use in applications requiring a high degree of reliability, for example in medical devices or other systems that may directly or indirectly impact human life. When using the device in computer and other systems that de- mand a greater degree of reliability than wireless networks, be sure to take all necessary precautions to ensure safety and prevent malfunction.

•Use only in the country in which the device was purchased. This device conforms to regulations governing wireless network devices in the country in which it was purchased. Observe all location regulations when using the device. FUJIFILM does not accept liability for problems arising from use in other jurisdictions.

•Wireless data (images) may be intercepted by third parties. The security of data transmitted over wireless networks is not guaranteed.

• Do not use the device in locations subject to magnetic fields,

2.4DS/OF4

This sticker indicates that

static electricity, or radio interference. Do not use the trans-

 

this device operates in

mitter in the vicinity of microwave ovens or in other loca-

 

the 2.4 GHz band using

tions subject to magnetic fields, static electricity, or radio

 

DSSS and OFDM modula-

interference that may prevent reception of wireless signals.

 

tion and may cause inter-

Mutual interference may occur when the transmitter is

 

ference at distances of up

used in the vicinity of other wireless devices operating in

 

to 40 m.

the 2.4 GHz band.

 

 

• The wireless transmitter operates in the 2.4 GHz band using

 

 

DSSS and OFDM modulation.

 

 

Wireless Network Devices: Cautions

•This device operates on the same frequency as commercial, educational, and medical devices and wireless transmitters. It also operates on the same frequency as licensed transmit- ters and special unlicensed low-voltage transmitters used in RFID tracking systems for assembly lines and in other similar applications.

•To prevent interference with the above devices, observe the following precautions. Confirm that the RFID transmitter is not in operation before using this device. Should you observe that the device causes interference in licensed transmitters used for RFID tracking, immediately choose a new operating frequency for this device to prevent ad- ditional interference. If you notice that this device causes interference in low-voltage RFID tracing systems, contact a FUJIFILM representative.

x