Manuals / Brands / Photography / Camcorder / FujiFilm / Photography / Camcorder

FujiFilm X-S1, 16199188 sive, ended, Problem, printed, Solution, No color, No sound, VIDEO SYSTEM, the TV (P106), The printer is off, No picture or sound, Pictures can not be

1 144

Download 144 pages, 2.52 Mb

Problems and Solutions

Connections/Miscellaneous

	Problem	Solution
		• The camera is not properly connected: Connect the camera properly (P69).
		• An A/V cable was connected during movie playback: Connect the camera once movie playback has
		ended.
	No picture or sound.	• Input on the television is set to “TV”: Set input to “VIDEO”.
		• The camera is not set to the correct video standard: Match the camera QVIDEO SYSTEM setting to
		the TV (P106).
		• The volume on the TV is too low: Adjust the volume.
	No color	Match the camera QVIDEO SYSTEM setting to the TV (P106).
	The computer does not	Be sure the camera and computer are correctly connected (P81).
	recognize the camera.
	recognize the camera.
	Can not transfer RAW or	Use the bundled software to transfer pictures (P77).
	JPEG files to computer.	Use the bundled software to transfer pictures (P77).
	JPEG files to computer.
	Pictures can not be	• The camera is not properly connected: Connect the camera correctly (P71).
	printed.	• The printer is off: Turn the printer on.
	Only one copy is printed/	The printer is not PictBridge compatible.
	the date is not printed.
	The camera is unrespon-	• Temporary camera malfunction: Remove and reinsert the battery (P10).
	sive.	• The battery is exhausted: Charge the battery (P9) or insert a fully-charged spare battery (P10).
	The camera does not	Remove and reinsert the battery (P10). If the problem persists, contact your FUJIFILM dealer.
	function as expected.
	function as expected.
	No sound.	Turn silent mode off (P99).

114

Contents

Owner’s Manual Before You Begin First Steps Basic Photography and Playback More on Photography For Your Safety Page For Your Safety Be sure to read this notes before using Safety Notes WARNING Page Page CAUTION Page NOTICES About This Manual Table of Contents Table of Contents More on Playback Movies Connections Menus Page Technical Notes Troubleshooting Appendix Introduction Introduction Parts of the Camera For more information, refer to the page listed to the right of each item 88 71 68 Tripod mount The Selector Button Move cursor up (e) Fn2 (Function 2) button (P52) Fn2 The Electronic Viewfinder (EVF) EVF/LCD Eye sensor Bright Ambient Lighting EVF/LCD ■ Shooting ■Playback Page •Playback IFAVORITES cHighlights Overexposed areas blink on and off Histograms Attaching Accessories Charging the Battery Inserting the Battery Inserting the Battery 3Close the battery-chambercover. Press the cover down un til it clicks into place Removing the Battery Before removing the battery Inserting a Memory Card memory cards Inserting a Memory Card 3Close the memory card slot cover Removing Memory Cards ■Compatible Memory Cards Turning the Camera on and Off Basic Setup Taking Pictures Taking Pictures 2Frame the picture Zoom ring Zoom indicator bFocus Lock Focus Press the shutter button halfway to focus Shoot Smoothly press the shutter button the rest of the way down to take the picture bThe Shutter Button Silent Mode DISP/BACK The Indicator Lamp Indicator lamp The indicator lamp shows camera status as follows: Viewing Pictures Shooting Mode Shooting Mode P: PROGRAM AE Program Shift gEXTERNAL FLASH UDYNAMIC RANGE NISO S: SHUTTER PRIORITY AE •The shutter speed is restricted depending on the ISO setting A: APERTURE PRIORITY AE M: MANUAL •Noise in the form of randomly-spacedbright pixels may occur in long exposures The Exposure Indicator the exposure indicator C1/C2/C3: CUSTOM MODE Menu/setting KCUSTOM SET C1/C2/ C3 menu ■R(EAUTO) ■ EPriority ■ rMOTION PANORAMA Follow an on-screenguide to take photos that will automatically be joined to era has been panned through 120 ° ■iPRO FOCUS ■jPRO LOW-LIGHT SP SCENE POSITION ASCENE POSITION Scene Capture natural lighting under low-lightconditions Choose for portraits lDOG/mCAT AUTO RELEASE Focus Lock The AE/AF LOCK Button FMacro and Super Macro Modes (Close-ups) NUsing the Flash (Super-IntelligentFlash) Red-EyeRemoval BRED EYE REMOVAL Turning the Flash Off Optional Flash Units JUsing the Self-Timer Continuous Shooting (Burst Mode/Bracketing) ■ITOP n ■PBEST FRAME CAPTURE before after ■OAE BKT ■WISO BKT ■XFILM SIMULATION BKT ■YDYNAMIC RANGE BKT dExposure Compensation Metering Focus Mode Focus Mode bManual Focus •Use of a tripod is recommended. Focus may be affected if the camera moves IFOCUS RING The camera may not focus if the focus ring is Focus Frame Selection Sensitivity White Balance White Balance White balance is adjusted for flash lighting only in k: Color Temperature Choose for bluer light sources or “colder” pictures The Fn Button bIntelligent Face Detection nFace Recognition Viewing, Editing, and Deleting Existing Data Taking RAW Pictures Playback Options Playback Options Playback Zoom Press DISP/BACK or MENU/OK to exit zoom Multi-FramePlayback To change the number of images displayed, press nin single-frameview bTwo-FrameDisplay Two-framedisplay can be used to compare pictures taken in Cmode ADeleting Pictures Viewing Photo Information Image Search XPhotoBook Assist PhotoBooks Viewing PhotoBooks Editing and Deleting PhotoBooks 2Choose from the following options: •EDIT: Edit the book as described in “Creating a PhotoBook” on page EDIT Viewing Panoramas Recording Movies Recording Movies Taking Photographs during Recording Press the shutter button to take a photograph during recording •See page 88 for information on choosing how photo- graphs are recorded Movie Frame Size WMOVIE MODE Full HD (High Definition) High Definition Standard definition aViewing Movies Viewing Pictures on TV Page Printing Pictures via USB Printing Pictures via USB bPrinting the Date of Recording PRINT WITHOUT DATE) Printing the DPOF Print Order KPRINT ORDER (DPOF) 1 In the PictBridge display, press DISP/BACK to open the PictBridge menu 2 Press the selector up or down to highlight uPRINT DPOF PRINT DPOF During Printing • If the printer does not support date printing, the PRINT WITH DATE on the pictures in the DPOF print order made using the printer ■WITH DATE s/ WITHOUT DATE Number of copies bIntelligent Face Detection Repeat steps 7The total number of prints is displayed in the monitor. Press MENU/OK to exit ■RESET ALL Viewing Pictures on a Computer connect the camera to the computer until installation is complete Viewing Pictures on a Computer Exit any applications that may be running and insert the installer CD in a Windows 7/Windows Vista SETUP.EXE Yes Macintosh: Installing FinePixViewer CPU PowerPC or Intel (Core 2 Duo or better) Pre-installedversions of Mac OS X version 10.3.9–10.6 (visit Mac OS X 10.5 or earlier Preferences… Other… When a camera is connected, open FPVBridge Cancel Help •Disconnect the camera before inserting or removing memory cards Uninstalling the Supplied Software Using the Menus: Shooting Mode OIMAGE SIZE [O4 : 3] Choose the image size and O4 : aspect ratio at which pictures [AUTO] A100% B200% C400% D800% dWB SHIFT R–Cy B-Ye fCOLOR [MID] FAF MODE [t] AF-S sMULTI •tAREA: Choose the focus area manually (P48) aSTILL SHOOTING IN MOVIE [MOVIE PRIORITY] Choose how the camera records photographs taken during movie recording (P67) STILL IMAGE KCUSTOM SET Save settings for P, S, A, M and all EXR modes except R(P26) vDISP. CUSTOM SETTING See pages 5–6for the locations of these items in the displays Virtual Horizon Using the Menus: Playback Mode ■Selecting Pictures for Upload ■RESET ALL: Deselecting All Pictures ISLIDE SHOW [MULTIPLE] NORMAL FADE-IN FADE-IN Setting COND was taken PUSH/PULL PROCESSING DPROTECT Protect pictures from accidental deletion 1Select DPROTECT in the playback menu 2 Highlight one of the following options and press MENU/OK: •SET ALL: Protect all pictures ORESIZE CIMAGE ROTATE Create a small copy of the current picture Rotate pictures taken in tall orientation so that 1 Display the desired picture ECOPY Copy pictures from internal memory to a memory card 1Select ECOPY in the playback menu 2 Highlight one of the following options and press the selector right: : Copy pic- tures from internal memory to a memory card nERASE FACE RECOG MENU/ OK Select pictures for printing on DPOF- and Pict- Bridge-compatibledevices (P72) JDISP. ASPECT [4 : 3] The Setup Menu The Setup Menu Setup Menu Options Default values are shown in square brackets [ ] FDATE/TIME Set the camera clock (P16) NTIME DIFFERENCE RRESET NTIME DIFFERENCE OBACKGROUND COLOR QVIDEO SYSTEM 2Highlight OK and press MENU/OK [CONT.] BFRAME NO Newpicturesarestoredinim BFRAME NO If the frame number reaches IPLAYBACK VOLUME [7] Adjust the volume for movie and voice memo playback JLCD BRIGHTNESS [0] LDUAL IS MODE Choose from the following image stabilization options: Image stabilization on. If + MOTION + MOTION is selected, the camera will adjust kAE/AF-LOCKMODE [P] AE&AF ON WHEN PRESSING AE/AF LOCK AE&AF ON/OFF SWITCH zFRAMING GUIDLINE [FGRID 9] Choose the type of framing grid available in shooting mode FGRID For “rule of thirds” composition mAUTOROTATE PB QVIDEO SYSTEM Choose a video mode for connection to a TV orientation) pictures during playback OBACKGROUND COLOR Optional Accessories ■ Printing ■Computer Related ■External Microphones ■Audio/Visual http://www.fujifilm. com/products/digital_cameras/index.html Caring for the Camera ■Water and Sand ■Condensation Problems and Solutions Problems and Solutions Menus and Displays Select ENGLISH for Qa(P16, 99) ENGLISH not in English No face is detected ject’s face occupies a larger area of the frame (P34) • The camera is tilted: Keep the camera level (P18) The camera is tilted • The subject’s face is poorly lit: Shoot in bright light Pictures are mottled function the camera off and wait for it to cool down LCD monitor displays nothing Connections/Miscellaneous • The camera is not properly connected: Connect the camera properly (P69) The camera is not properly connected ended No picture or sound Warning Messages and Displays Warning Messages and Displays cally The memory card is not formatted for use in the camera. Format the card (P100) replace the card Incompatible memory card. Use a compatible card (P14) then select CONTINUOUS for BFRAME NO. (P101) FRAME NO Exit silent mode before choosing a flash mode or adjusting the volume (P20) • More than 999 images are selected for deletion: Choose fewer images protection and try again (P94) No memory card inserted when ECOPY is selected. Insert a memory card COPY The source selected for ECOPY contains no images. Select a different source • The voice memo file is corrupt: The voice memo can not be played back The voice memo file is corrupt Internal Memory/Memory Card Capacity Specifications Sensitivity 1 image size Por Q 2 image size Q Metering 256-segment through-the-lens(TTL) metering; MULTI, SPOT, AVERAGE Flash 26.2 ft. (wide angle), 2.0 m–4.0m/6.5 ft.–13.1ft. (telephoto) Flash modes red-eyeremoval, off, slow sync with red-eyeremoval (red-eyeremoval on) 0.47-in., 1440k-dotcolor LCD viewfinder; frame coverage approx. 100% Power sources NP-95rechargeable battery at low temperatures Shooting weight Camera weight Nominal voltage Nominal capacity Weight Rated input Input capacity Color Television Systems Notices Although the monitor is manufactured using advanced Restrictions on Camera Settings Restrictions on Camera Settings