FujiFilm X-S1, 16199188 EVF/LCD, EVF/LCD, Eye sensor, Introduction, TMONITOR SUNLIGHT MODE, Bright Ambient Lighting, The Electronic Viewfinder (EVF)

Introduction

The Electronic Viewfinder (EVF)

The electronic viewfinder provides the same information as the monitor, and can be used when bright lighting conditions make the display in the monitor difficult to see. Press EVF/LCD button to select from the auto switch, monitor, or electric view finder mode. When the auto switch mode is set, the electric view finder turns on automatically when you put your eye to the view finder, and the monitor turns on when you take your eye away (note that the eye sensor may not respond if you are wearing glasses or your head is an angle to the camera).

Eye sensor

The camera is equipped with diopter adjustment to accommodate individual dif- ferences in vision. Slide the diopter adjustment control up and down until the view- finder display is in sharp focus.

Bright Ambient Lighting

Reflections and glare caused by bright ambient lighting may make it hard to see the display in the monitor, particularly when the camera is used outdoors. This can be addressed by holding the EVF/LCD button to trigger outdoor mode. Outdoor mode can also be enabled using the TMONITOR SUNLIGHT MODE option in the setup menu (P102).

4