Normal playback
Multi-frame playback
No text displayed
33
2
FAST FORWARDING IMAGES
32
VIEWING YOUR IMAGES (PLAYBACK)21 1 2
You can use “d” and “c” button to move
forward and backward respectively through your
images. The monitor display changes each time
you press the “DISP” button.
●
!
If image on the monitor is difficult to see, adjust the
monitor brightness (➡P.104).

◆Images That Can be Viewed on the FinePix4900 ZOOM◆

You can use this camera to view (excluding some uncompressed data) images recorded on an
FinePix4900 ZOOM or images recorded onto a 3.3V SmartMedia using a FUJIFILM FinePix series,
MX series and DX series digital camera.
You can fast forward through the frames by
holding down “d” or “c” button for about
3 seconds during playback.
During fast forward, 3 frames are shown
together in miniature on the monitor. When you
stop fast forward, the image enclosed in the
frame is displayed on the monitor as a single
image.
●
!
A progress bar is displayed to show the approximate
playback position on the SmartMedia.
➀Set the Mode switch to “#”.
➁The setting toggles between the viewfinder
(EVF) and the monitor (LCD) each time you
press the “EVF/LCD” button.
●
!
When you set the Mode switch to “#”, the last
image shot is displayed.
The EVF/LCD selection setting is retained
when the mode is switched or the camera
is switched off.
●
➀
●
➁