127
Safety Notes
126

Specifications

If a problem arises, switch the camera
off, remove the battery and disconnect
and unplug the AC power adapter.
Continued use of the camera when it is
emitting smoke, is emitting any unusual
odor, or is in any other abnormal state
can cause a fire or electric shock.
Contact your FUJIFILM dealer.
Do not allow water or foreign objects
to enter the camera.
If water or foreign objects get inside the
camera, switch the camera off, remove
the battery and disconnect and unplug
the AC power adapter.
Continued use of the camera can cause
a fire or electric shock.
Contact your FUJIFILM dealer.
Do not place the camera on an
unstable surface.
This can cause the camera to fall or tip
over and cause injury.
To ensure that you use your FinePix4900 ZOOM
camera correctly, read these Safety Notes and your
Owners Manual carefully beforehand.
After reading these Safety Notes, store them in a
safe place.
About the Icons
The icons shown below are used in this document to
indicate the severity of the injury or damage that can
result if the information indicated by the icon is ignored
and the product is used incorrectly as a result.
WARNING
This icon indicates that death or
serious injury can result if the
information is ignored.
CAUTION
This icon indicates that personal
injury or material damage can
result if the information is ignored.
The icons shown below are used to indicate the nature
of the information which is to be observed.
Triangular icons notify the user of information
requiring attention (Important).
Circular icons with a diagonal bar notify the
user that the action indicated is prohibited
(Prohibited).
Filled circles with an exclamation mark notify
the user of an action that must be performed
(Required).

WARNING

Unplug from
power socket.
These specifications are subject to change without notice.
The LCD monitor on your digital camera is manufactured
using advanced high-precision technology. Even so, small
bright points and anomalous colors (particularly around
text) may appear on the monitor. These are normal display
characteristics and do not indicate a fault with the monitor.
This phenomenon will not appear on the recorded image.
The electrostatic discharge can in some cases cause
problems. This is not a malfunction of FUJIFILM Digital
Cameras.
This indicates the number of available frames shot
consecutively at room temperature with a flash use rate of
50%. Note that these figures may vary depending on the
ambient temperature and the amount of charge in the battery.
Conditions for use
Temperature : 0°C to +40°C (+32°F to +104°F)
80% humidity or less (no condensation)
Camera dimensions (W/H/D)
110 mm 78.5 mm 93.5 mm / 4.3 in. 3.1 in. 3.7 in.
(not including accessories and attachments)
Camera mass (weight) : Approx. 410g / 14.5oz.
(not including accessories, batteries or SmartMedia)
Weight for photography : Approx. 450g / 18.9oz.
(including batteries and SmartMedia)
Accessories : See P.7
Optional Accessories : See P.105
111

Power Supplyand Others

Power supply
Use one of the following
Rechargeable Battery NP-80 or AC Power Adapter
AC-5V/AC-5VH

Input/Output Terminals

A/V Output : Stereo mini- jack (1)
Digital
USB (1) for image data output with a personal computer
DC Input
Socket for specified AC power adapter
Flash : Auto flash using flash control sensor
Effective range
:
Wide Approx. 0.3 m 4.5 m (1 ft. 14.7 ft.)
Tele Approx. 0.9 m 4.0 m (3 ft. 13.1 ft.)
Flash modes: Auto, Red-Eye Reduction,
Forced Flash, Slow Synchro,
Red-Eye Reduction +Slow Synchro
LCD monitor
2-inch, low-temperature polysilicon TFT 130000 pixels
Video output
NTSC (US/Canada model) / PAL (Europe model)
Self-Timer : 2 sec. / 10 sec. timer clock
Battery Type Using LCD monitor
Using LCD viewfinder
NP-80 battery Approx. 100 Approx. 120
No. of available shots using battery (battery life) with a
fully charged battery