87
4
[DPOF DATE SETTING
PLAYBACK MENU
86
[HOW TO SPECIFY PRINT OPTIONS
PLAYBACK MENU
This function allows you to select whether or not
the date of shooting is included on the print.
➀Set the Mode switch to “#”.
➁Press the “MENU/OK” button to display the
menu on the monitor.
➂Press “c” to select “KDPOF”.
1 2
With the FinePix4900 ZOOM, you can order prints using the Digital Print Order Format
(DPOF).
You can use the DPOF to specify the following :
●The frames to be printed and the number of prints for each frame
●Imprinting of the date and time
This section gives a detailed description of how to order your prints with the FinePix4900
ZOOM.
✽Note that some printers do not support date and time imprinting or specification of the
number of prints.
✽Note that the warnings shown below may be displayed while you are specifying the
prints.
(➡P.121)
When you erase the image, the DPOF setting for that image are deleted at the same
time.
(➡P.121)
If you load a SmartMedia that contains frames specified for printing on another
camera, those print specifications are all reset and replaced by the new print
specifications.
(➡P.121)
No more than 999 frames can be specified on the same SmartMedia.
➀Use “b” to select “HDATE”.
➁Press “dc” to specify “DATE ON” or “DATE
OFF”. This setting is then valid for all the
prints until the setting is changed.
●
!
Before specifying any other settings, first specify
whether date is to be shown or not.
●
!
DPOF settings cannot be specified for movie.
●
➀●
➁
●
➂
●
➀●
➁