71
3
70
This mode can be selected in the “5•7•9•4”
photography modes.
Set this setting to “ON” when you are using an
external flash.
●Synchronization speed :
Up to 1/1000 sec.
➀Close the built-in flash.
➁Mount the external flash on the camera’s hot
shoe.
●
!
Built-in and external flash units cannot be used at
the same time.
1 2
Select “5•7•9” (➡P.42) or “4” (➡P.44).
However, the use of “9” or “4” mode is
recommended.
MODE SELECT

F

ISO
mm
AUTO
3 4

IUSING AN EXTERNAL FLASH

PHOTOGRAPHY MENU
●
➀
●
➁
◆Compatible Flash Units◆
Flash units that can be used with this camera
must meet the following 3 conditions :
●The aperture can be set.
●External flash synchronization can be used.
●The ISO sensitivity can be set.
When you are using an external flash, always
specify a fixed aperture setting.
External Flash Settings
For external flash, refer to the user’s manual for
the flash and specify the settings as described
below.
●Match the settings to the camera aperture
setting.
In “5” or “7” mode, match the settings to the
aperture measured by the camera.
●Match the ISO sensitivity setting (➡P.68) to
the setting on the camera.
●Select External Flash mode (TTL mode cannot
be used).
●
!
Set the white balance (➡P.64) to AUTO or Custom
White Balance (➡P.72).
●
!
Flash photography cannot be used when continuous
shooting (➡P.59) or auto bracketing (➡P.68) is
selected.