15
1
SELECTING THE POWER SUPPLY
14
ATTACHING THE LENS CAP AND SHOULDER STRAP
1Getting Ready
Attach the shoulder strap by threading it through
the strap mount. Attach the other end of the
shoulder strap to the other side of camera in the
same way.
After attaching the shoulder strap, check
carefully that the strap is firmly secured.
1
●
!
Attaching the shoulder strap incorrectly could result
in the camera being dropped.
●
➀●
➁
➀Pull the lens cap cord through the strap
mount.
➁Fit and remove the lens cap by squeezing the
left and right sides of the cap.
●
!
Attach the lens cap cord to avoid losing the lens cap.
●
!
Always remove the lens cap when taking pictures.
Arrow
mark
2
1
●
!
Do not use excessive force to open the battery
cover.
●
!
When replacing the battery, always switch the
camera off beforehand. If you open the battery cover
without switching the camera off, the camera
settings may revert to the factory defaults.
●
!
Take care to load the battery the right way up. Insert
the end of the battery with the gold terminals into the
battery compartment first.
➀Slide the battery cover in the direction of the
arrow and lift it open.
➁Load the battery with the “▼” indicator end
downwards.
Loading the Battery
●
➀●
➁
●
➀
●
➁
➀Hold the battery in, ➁and close the battery
cover.
◆Battery Type◆
NP-80 rechargeable battery.
●
!
The battery is not fully charged at shipment. You
must charge the battery before you use it.
●
!
See P.114 – 116 for more information on the
battery.
2