30
Press down the shutter release halfway.
☞Focusing is complete when the AF lamp (green) lights up.
∗If you are closer than 65 cm (26 in.) to the subject, the AF lamp will start blinking to warn you
that the subject cannot be focused. Note that if you are closer than 30 cm (12 in.) to the subject,
the AF lamp turns on but the subject cannot be focused.
∗Although the shutter can be released while the AF lamp is blinking slowly, the picture may be
out of focus. (→p.13)
5
6Press the shutter button down completely.
☞The film is advanced to the next frame.
☞The number shown in the exposure counter will increase by 1 with each frame exposed.
∗The AF lamp and self-timer/remote controller lamp will go off once and reappear immediately
after the shutter is released.
∗During the charging time of the flash (when the alarm sign is blinking “ ”) the shutter cannot be
released.