Battery casing

Inserting the Batteries

The camera takes two AA alkaline (LR6) batteries (supplied) , two lithium batteries (sold separately) or two AA rechargeable Ni-MH batteries (sold separately). Insert the batteries in the camera as described below.

Steps First

1Open the battery-chamber cover.

1Note

Be sure the camera is of f before opening the battery- chamber cover.

3Cautions

•Do not open the battery-chamber cover when the camera is on. Failure to observe this pre- caution could result in damage to image fi les or memory cards.

•Do not use excessive force when handling the battery-chamber cover.

2Insert the batteries.

Insert the batteries in the orientation shown by the “+“ and “–“ marks inside the battery chamber.

3Close the battery-chamber cover.

3Cautions

• Insert the batteries in the correct orientation.

• Never use batteries with peeling or damaged casing or mix old and new batteries, batteries with different charge levels,

or batteries of different types.

Failure to observe these precautions could result in the batteries leaking or overheating.

•Never use manganese or Ni-Cd. Replace AA alkaline batteries with batteries of the same make and grade as those supplied with the camera.

•If the battery-chamber cover can not be latched easily, confirm the battery orientation first. Do not use exces- sive force to latch it.

4