FujiFilm BL00729-200(1) Connecting to a PC, MEMO, CD-ROM, CAUTION, CAUTION, ;USB socket, DSet your PC, FinePixViewer Overview, (Software for FinePix)

Connecting to a PC

By connecting the camera to a PC, your system can be expanded to fill a wide range of uses. Using “FinePixViewer” performs images saving, browsing and file management etc.

FinePixViewer Overview

Enables importing images, managing files and folders, and ordering prints using the internet (only Windows users).

CAUTION

The Windows CD-ROM may also be required during installation. In this event, change CD-ROMs as directed by the on-screen instructions.

CAUTION

•Do not format the Memory Card in the camera on the PC.•Use the Memory Card with images taken by a FUJIFILM Digital camera.BConnect the camera to your PC using the USB cable (included).

; USB socket

Refer to Software Installation (➝p.121, 123) the first time you connect the camera to your PC. Install the software first. Do not connect the camera to the PC before installing all the software.

CD-ROM

(Software for FinePix)

CPress wfor about 1 second to turn the camera on in Playback mode.DSet your PC

AInsert the Memory Card with images into the camera (➝p.19).You can use the xD-Picture Card and the SD Memory Card with the FinePix F100fd.In this Owner’s Manual, these cards are expressed as “Memory Card”.

MEMO

In Windows, if FinePixViewer is already installed, the driver will be set automatically. No action is required.

126