Warning Displays

The table below lists the warnings that are displayed on the LCD monitor.
Warning Displayed

Explanation

 

Remedy

 

 

 

 

 

 

(Lit red)

The battery is low or completely out of charge.Load fully charged battery.
V(Blinking red)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

There is a strong likelihood of camera shakeUse flash photography. A tripod may be

 

 

 

 

 

 

 

 

because the shutter speed is slow.

recommended, depending on the scene and mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The AF (autofocus) cannot work effectively.

•

If the image is too dark, take the picture at a

 

 

 

 

 

 

 

{

 

 

distance of around 2 m (6.6 ft.) from the subject.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

•

Use AF lock to take the picture (➝p.35).

 

(Lit red)

 

• Select Macro mode when taking close-up shots

*The shape of the AF frame

 

 

(➝p.56).

differs depending on the

 

 

 

setting in the [SHOOTING

 

 

 

 

 

 

 

MENU].

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Aperture/

The camera cannot shoot the picture at the correct

The picture can be taken, but the correct brightness

Shutter speed display

brightness due to too bright or dark shooting(exposure) will not be obtained.

 

 

 

 

(Lit red)

condition.

 

 

 

 

 

 

 

 

 

 

 

 

 

[FOCUS ERROR]Camera malfunction or fault.

• Turn the camera on again, taking care not to touch

 

 

 

 

 

 

 

 

 

 

the lens.

 

[ZOOM ERROR]

 

• Turn the camera off and on again. If the message

 

 

 

 

 

 

 

 

 

 

still appears, contact your FUJIFILM dealer.

[LENS CONTROL ERROR]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[NO CARD]

Memory Card is not inserted when transferringInsert a Memory Card.

 

 

images.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• The Memory Card or internal memory is not

• Format the Memory Card or internal memory on

 

 

 

 

 

 

 

 

formatted.

 

the camera (➝p.113).

 

 

 

 

 

 

 

 

• The Memory Card was formatted on a PC.• Format the Memory Card on the camera.

[CARD NOT INITIALIZED]

• The Memory Card contact area is soiled.

• Wipe the contact area on the Memory Card with a

 

 

soft, dry cloth. It may be necessary to format the

 

 

 

 

 

 

 

 

 

 

Memory Card (➝p.113). If the message still

 

 

 

 

 

 

 

 

 

 

appears, replace the Memory Card.

 

 

 

 

 

 

 

 

• Camera fault.• Contact your FUJIFILM dealer.

 

 

 

 

 

 

 

 

 

 

 

136