FujiFilm BL00729-200(1) three times, ATurn the camera on, for more information, Setting the menu (➝p.81), (Angle: up to approx. 15°), another device in the same way

15˚ 15˚

cm

5~20

(Angle: up to approx. 15°)

CPoint the camera’s infrared port towards the front of the camera’s infrared port (➝p.12). Transmission distance is about 5 to 20 cm (2 to 7.9 in.) within approx. 15°.

IR COMMUNICATION

CONNECTING

CANCEL

DPress pto begin transmission. When transmission is completed, [TRANSMISSION COMPLETED] will appear on the LCD monitor.

Setting the menu (➝p.81)

CAUTION

•Check that your camera is turned on when transmitting the image data.

•If the image is 3:2 ratio, white lines may appear at the top and bottom or right and left of the print, depending on the printer type.

•Movie images cannot be printed.

•Images photographed with a camera other than FinePix F100fd may not be printed or transmitted.

•If the [QUALITY] of sending image data is over 3, [QUALITY] of the image will be set to 3.

• You can send the image data by simply pressing p		Advanced
CHECK
three times.		—Features
• Refer to the manual provided with the receiving device
for more information.
Receiving the image data		Playback
Receiving the image data from a FUJIFILM digital camera
is shown as an example here. You can receive data from
another device in the same way.
	IR COMMUNICATION

TRANSMIT RECEIVE

CANCEL

ATurn the camera on.

BPress por qto select the sending frame (file).

Continued Q 83