25
Using
the Camera
24
VIEWING YOUR IMAGES (PLAYBACK)PLAYBACK MODE
USING THE ZOOM (OPTICAL ZOOM, DIGITAL ZOOM)
You can zoom in and out by pressing the zoom
buttons.
The digital zoom can be used with the “3”, “2”
and “1” quality mode setting.
When zooming switches between optical and digital,
the “■” indicator stops. Pressing the same zoom
button again starts the “■” indicator moving again.
●
!
The digital zoom cannot be used with the “5” setting.
●
!
See P.28 for information on changing the quality mode
setting.
●
!
If the shot goes out of focus during zooming, hold the shutter
button down halfway to refocus the shot.
BEST FRAMING
You can select the Framing Guideline function in
the “q” still photography mode. The LCD monitor
display changes each time you press the “DISP”
button. Press the “DISP” button until “Framing
Guideline” appears.
●
!
When Macro, AF Area or Manual Focus is selected, the LCD
monitor cannot be set to OFF.
Optical zoom
Digital zoom
Zoom bar display
hOptical zoom focal lengths(35 mm camera equivalents)
Approx. 35 mm-105 mm, max. zoom scale: 3×
hDigital zoom focal lengths(35 mm camera equivalents)
3: Approx. 105 mm-147 mm, max. zoom scale: 1.4×
2: Approx. 105 mm-189 mm, max. zoom scale: 1.8×
1: Approx. 105 mm-231 mm, max. zoom scale: 2.2×
LCD monitor ON
Framing Guideline
displayed
LCD monitor OFF
◆Important ◆
Single-frame Playback
1Set the Power switch to “w”.
2Press “c” to scan forward through your images
and “d” to scan backwards.
●
!
When you set the Power switch to “w”, your last shot is
played back.
●
!
If the lens is extended during playback, the lens automatically
retracts as a protective measure if the camera is not used for
approx. 6 seconds.
Fast-forwarding Through Your Images
You can scan quickly through your images by
holding down “d” or “c” for approx. 1 second
during playback.
Multi-frame Playback
In playback mode, the display shown on the LCD
monitor switches each time you press the “DISP”
button. Press the “DISP” button until the multi-
frame playback screen (9 frames) appears.
1Press “a”, “b”, “d” or “c” to move the cursor
(orange frame) to the frame you want to select.
Pressing “a” or “b” repeatedly switches to the
next page.
2You can enlarge the current image displayer by
pressing the “DISP” button again.
●
!
A bar is displayed as a rough guide to the location of the
current image on the xD-Picture Card.
Text displayed
No text displayed
Multi-frame playback
◆Still images that can be viewed ◆
Scene
0102
0102
Use this frame with the main subject positioned at
the intersection of two lines or align one of the
horizontal lines with the horizon.
This frame allows you to compose your own
shots while remaining aware of the subject's size
and the balance of the shot.
●
!
The framing guideline is not recorded on the image.
●
!
The lines in the scene frame divide the recorded pixels into
3 roughly equal parts horizontally and vertically. When the
image is printed, the resulting print may be shifted slightly
from the scene frame.
Always use AF/AE lock when composing a shot.
The image may not be focused correctly if you do
not use AE/AF lock.
You can use this camera to view still images recorded on the FinePix F700 or still images (excluding
some uncompressed images) recorded on a FUJIFILM digital camera that supports xD-Picture Cards.
SHOOTING STILL IMAGES (AUTO MODE)
STILLIMAGE MODE
The position of the “■” indicator on the zoom bar
shows the zooming status.
The area to the right of the separator indicates
digital zooming, while the area to the left indicates
optical zooming.
●
!
The digital zoom can only be used for shots taken using the
LCD monitor.
Playback frame No.