9392
Notes on the Power Supply
■Handling the BatteryTo avoid injury or damage, observe the following:
hDo not allow the metal portions of the battery to touch
other metal objects.
hDo not bring the battery close to a flame or throw it into a
fire.
hDo not attempt to disassemble or modify the battery.
hDo not recharge the battery with chargers other those
specified.
hDispose of used batteries promptly.
To avoid damaging the battery or shortening its
life, observe the following:
hDo not drop the battery or otherwise subject it to strong
impacts.
hDo not immerse the battery in water.
To ensure that you obtain optimum battery
performance, observe the following:
hAlways keep the battery terminals clean.
hStore the battery in a cool, dry place. Storing the battery
for long periods in a hot location can shorten the battery
life.
If you use the battery for a long period, the camera
body and the battery itself will become warm. This is
normal and is not a malfunction. Use the AC power
adapter supplied with the camera if you are taking
pictures or viewing images for a long period of time.
■Specifications of the Enclosed NP-40Nominal voltage DC 3.7V
Nominal capacity 710 mAh
Operating temperature
0°C to +40°C (+32°F to +104°F)
Dimensions 35.3 mm ×40 mm ×6 mm
(1.39 in. ×1.6 in. ×0.24 in.)
(W ×H ×D)
Mass (Weight) Approx. 20g (0.7 oz.)
✽These specifications are subject to change without notice.
Use only the AC-5VW AC Power Adapter with your
FinePix F700 Digital Camera. The use of other AC power
adapters may result in damage to your camera.
hThe AC Power Adapter is only intended for indoor use.
hPlug the connection cord plug securely into the DC input
terminal of the FUJIFILM Digital camera.
hTurn off the power switch of the FUJIFILM Digital camera
before disconnecting the connection cord from the
FUJIFILM Digital camera’s DC input terminal. To
disconnect, take hold of the plug and pull it out (do not
disconnect it by pulling on the cord).
hDo not use the AC power adapter with any device except
the specified device.
hDuring use, the AC power adapter will become hot to
touch, but this is normal.
hDo not disassemble the AC power adapter. Doing so
could be dangerous.
hDo not use the AC power adapter in a place with high
temperature and high humidity.
hDo not drop or subject the AC power adapter to strong
shocks.
hThe AC power adapter may emit a humming noise, but
this is normal.
hIf used near a radio, the AC power adapter may cause
static, so play the radio in a distant place.
✽Very Occasionally, DC output will be prevented by the
operation of the internal protection circuit. In this event,
unplug the AC-5VW AC power adapter from the power
socket for a few moments and then plug it in again. This
will restore DC output.
■Specifications (AC-5VW)Power Supply AC 100V to 240V,50/60Hz
Rated Input Capacity 13W(U.S.A.and Canada)
0.08A to 0.2A(other countries)
Rated Output DC 5.0V 1.5A
Temperature During Use
0°C to +40°C (+32F to 104F)
Storage Temperature –10°C to +70°C
(+14F to 158F)
Dimensions (MAX.) 40 mm ×21 mm ×79 mm
(1.6 in. ×0.8 in. ×3.1 in.)
(W ×H ×D)
Mass (Weight) Approx. 110 g (3.9 oz.)
(excluding power cable)
✽Please note that specifications and characteristics are
subject to change without notice.
AC Power Adapter
Notes on Using Your Camera Correctly
Notes on the Power Supply
eBe sure to read this information in conjunction with “Safety Notes” (➡P.102), to ensure that youuse your camera correctly.■Places to AvoidDo not store or use the camera in the following types of
locations:
hIn the rain or in very humid, dirty or dusty places.
hIn direct sunlight or in places subject to extreme
temperature rises, such as in a closed car in summer.
hExtremely cold places.
hPlaces subject to strong vibration.
hPlaces affected by smoke or steam.
hPlaces subject to strong magnetic fields (such as near
motors, transformers or magnets).
hIn contact with chemicals such as pesticides or next to
rubber or vinyl products for long periods of time.
■Notes on Immersion in Water or SandThe FinePix F700 is particularly adversely affected by
water and sand. When you are at the beach or close to
water, ensure that the camera is not exposed to water or
sand. Take care also not to place the camera on a wet
surface. Water or sand inside the camera can cause faults
that may be irreparable.
■Notes on CondensationIf the camera is carried suddenly from a cold location into a
warm place, water droplets (condensation) may form on
the inside of the camera or on the lens. When this occurs,
switch the camera off and wait an hour before using the
camera. Condensation may also form on the xD-Picture
card. In this event, remove the xD-Picture card and wait a
short time before using it again.
■When the Camera is Unused for LongPeriodsIf you do not intend to use the camera for a long period of
time, remove the battery and the xD-Picture card before
storing the camera.
■Cleaning Your CamerahUse a blower brush to remove dust from the lens and
LCD monitor screen as these surfaces, and then wipe
lightly with a soft, dry cloth. If any soiling remains, apply
a small amount of lens cleaning liquid to a piece of
FUJIFILM lens cleaning paper and wipe gently.
hDo not scratch hard objects against the lens and LCD
monitor screen as these surfaces are easily damaged.
hClean the body of the camera with a soft, dry cloth. Do
not use volatile substances such as thinners, benzine or
insecticide, as these may react with camera body and
cause deformation or remove the coating.
■Using the Camera OverseasWhen travelling overseas, do not place your camera in the
check-in baggage. Baggage handling at airports may
subject baggage to violent shocks, and the camera may be
damaged internally even when no external damage is
visible.
This camera uses the Rechargeable Lithium-ion Battery
Pack NP-40. Note the points below when using the
rechargeable battery. Take particular care to read the
Safety Notes to ensure that you use the battery correctly.
✽When shipped, the NP-40 is not fully charged. Always
charge the NP-40 before using it.
hWhen carrying the NP-40,
install it in a digital camera
or keep it in the soft case.
hWhen storing the NP-40,
place it inside the special
soft case provided.
■Battery FeatureshThe NP-40 gradually loses its charge even when not
used. Use a NP-40 that has been charged recently (in
the last day or two) to take pictures.
hTo maximize the life of the NP-40, switch the camera off
as quickly as possible when it is not being used.
hThe number of available shots will be lower in cold
locations or at low temperatures. Take along a spare
fully charged NP-40.
You can also increase the amount of power produced by
putting the NP-40 in your pocket or another warm place
to heat it and then loading it into the camera just before
you take a picture.
If you are using a heating pad, take care not to place the
NP-40 directly against the pad. The camera may not
operate if you use a depleted NP-40 in cold conditions.
■Charging the BatteryhYou can charge the battery using the camera and the AC
power adapter (supplied).
iThe NP-40 can be charged at ambient temperatures
between 0°C and +40°C (+32°F and +104°F). At an
ambient temperature of +23°C (+73°F), it takes
approximately 2 hours to charge a fully depleted
NP-40 battery.
iYou should charge the NP-40 at an ambient
temperature between +10°C and +35°C (+50°F and
+95°F). If you charge the NP-40 at a temperature
outside this range, charging takes longer because the
performance of the NP-40 is impaired.
iYou cannot charge the NP-40 at temperatures of 0°C
(+32°F) or below.
hYou can also use the optional Battery Charger BC-65 to
charge the NP-40. When charging, use the NP-40
battery adapter supplied with the BC-65 (Refer to the
Owner’s Manual for details).
iThe NP-40 can be charged using the BC-65 Battery
Charger at ambient temperatures between 0°C and
+40°C (+32°F and +104°F). At an ambient temperature
of +23°C (+73°F), it takes approximately 90 minutes to
charge a fully depleted NP-40 battery.
iYou should charge the NP-40 at an ambient
temperature between +10°C and +35°C (+50°F and
+95°F). If you charge the NP-40 at a temperature
outside this range, charging takes longer because the
performance of the NP-40 is impaired.
hThe NP-40 does not need to be fully discharged or
exhausted flat before being charged.
hThe NP-40 may feel warm after it has been charged or
immediately after being used. This is perfectly normal.
hDo not recharge a fully charged NP-40.
■Battery LifeAt normal temperatures, the NP-40 can be used at least
300 times.
If the time for which the NP-40 provides power shortens
markedly, this indicates that the NP-40 has reached the
end of its effective life and should be replaced.
The Lithium-ion Battery Pack NP-40 is both compact and
capable of storing large quantities of power. However, if It
is stored for long periods while charged, the performance
of the battery can be impaired.
hIf the battery will not be used for some time, run the
battery flat before storing it.
hAlways remove the battery from the camera or battery
charger when it is not being used.
hPlace the battery pack inside the soft case and store in a
cool place.
✽The battery should be stored in a dry location with an
ambient temperature between +15°C and +25°C (+59°F
and +77°F).
✽Do not leave the battery in hot or extremely cold places.
Notes on Using the Battery (NP-40)
Soft case
Battery
(NP-40) WARNINGS