DC IN 5V socket
19
1
USING THE AC POWER ADAPTER
18
CHARGING THE BATTERY
➀Open the connector cover on the bottom of
the camera.
➁Check that the camera is switched off and
then place it in the cradle.
The self-timer lamp lights and battery charging
begins. When charging is completed, the light
goes off.
You can connect the AC-5V/AC-5VH AC Power
Adapter directly to the DC IN 5V socket on the
camera without using the cradle. The AC Power
Adapter is useful because it allows you to easily
keep the camera charged, thereby allowing you
to take pictures and play back images without
worrying about depleting the battery.
●Compatible AC power adapters
Model: AC-5V/AC-5VH (provided as an accessory
or sold separately)
21
●
!
Charging a fully depleted battery takes approximately
5 hours.
●
!
Switching the cradle on during charging interrupts
the charging.
●
!
By using the optional Battery Charger BC-80, you
can reduce the charging time to approximately 70
minutes (➡P.109).
●
!
Push the cradle connection plug firmly into the
camera socket.
●
!
Problems arising through the use of products other
than genuine FUJIFILM products are not covered by
your warranty.
●
!
See P.114 for additional notes on the AC power
adapter.
●
!
The shape of the plug and socket-outlet depends on
the country of use.
Check that the camera is switched off. Plug the
AC power adapter connector into the DC IN 5V
socket on the camera and then plug the adapter
itself into the main power outlet.
You do not need to press the power button
on the cradle.
●
➀●
➁
●
!
The socket-outlet shall be installed near the
equipment and shall be easily accessible.